O rings for Rem 1100

[powdergun]

I know I can get replacement o-rings from Rem or a parts supplier but I have been reading that one can find these at a regular hardware supplier like Fastenal.

Has anyone used these and if so how do they work and what was the exact size and type ?

Thanks

 

[3macs1]

I know I can get replacement o-rings from Rem or a parts supplier but I have been reading that one can find these at a regular hardware supplier like Fastenal.

Has anyone used these and if so how do they work and what was the exact size and type ?

Thanks

Yes they are fine just make sure they are viton. Assuming `12ga ??
I have the size somewhere

Viton # 021 size measures 15/16 id X 11/16 od X 1/16 w.

 

[gunsaholic]

Yes, #021 viton o-ring is what you need. I bought some a few years ago from a supplier in the US. I think they were something like 18 cents a piece. Don't remember the name. Anyhow, they work fine. Far, far cheaper than getting them from Remington.

 

[3macs1]

I got mine on e-bay years ago.

 

[BigUglyMan]

Are they the same as the 11-87? My brother is/was (not sure) in an o-ring jam with his 11-87. I remember that he ordered from Brownells and got clobbered with the shipping. Not sure if he sent them back or not.

 

[3macs1]

Are they the same as the 11-87? My brother is/was (not sure) in an o-ring jam with his 11-87. I remember that he ordered from Brownells and got clobbered with the shipping. Not sure if he sent them back or not.

Same as far as I remember but I only have one 1187 so someone else can confirm
Cheers

 

[gunsaholic]

Yes, they are the same. I have the 1187.

 

[Sinasta]

Where can we source these o-rings in Canada?

 

[3macs1]

Where can we source these o-rings in Canada?

Any hydraulic shop that sells hose or makes hoses for equipment will normally have them in viton. Here transmission shops also, industrial suppliers like acklandsgrainger
Cheers

 

[salarguy]

Yes they are fine just make sure they are viton. Assuming `12ga ??
I have the size somewhere

Viton # 021 size measures 15/16 id X 11/16 od X 1/16 w.

Hmm bigger inside than outside?

 

[FLHTCUI]

Where can we source these o-rings in Canada?

3macs has got it.
Went to a local hydrolic shop and asked for a replacement seal of the one I had in my hand.
Viton is the way to go.
Reliable in Vancouver sells them too and doesnt charge the college fund for your kids either.
Rob

 

[bertn]

In case you don't want to go through great lengths sourcing them I have Viton rings for 1100/11-87 for cheap, just send me a pm for more info.

 

[Grouse Man]

Princess Auto.

 

[3macs1]

Hmm bigger inside than outside?

Humm must be a NL thing that is 1" and 1/16". Just get no.021 and yes a space would have helped but 15/16 ID plus 1/16 and 1/16 ring thickness for OD

Cheers

 

[salarguy]

Humm must be a NL thing that is 1" and 1/16". Just get no.021 and yes a space would have helped but 15/16 ID plus 1/16 and 1/16 ring thickness for OD

Cheers

That's just how I reply to perfectionists! lol

 

[3macs1]

That's just how I reply to perfectionists! lol

See you have to remember I am a CAPER which is just a newfie not smart enough to take the north sydney ferry back home LOL

 

[salarguy]

See you have to remember I am a CAPER which is just a newfie not smart enough to take the north sydney ferry back home LOL

See, I had you pegged all along!

 

[salarguy]

Yes, #021 viton o-ring is what you need. I bought some a few years ago from a supplier in the US. I think they were something like 18 cents a piece. Don't remember the name. Anyhow, they work fine. Far, far cheaper than getting them from Remington.

There is an o-ring superior to Viton in all respects. It's called VQM SIL I've been told you will never need to replace. Very spendy though!

 

[m12man]

Shoot your 1100 "wet" with Breakfree and you may need an "o" ring every 20,000 rounds!!!

 

[Woody-to]

Where can we source these o-rings in Canada?

I needed a bunch of orings, got quotes from a few Canadian Suppliers, they were almost 10x the price of ones from the USA. I like to buy Canadian if I can, but for 1/10th the price it's hard to say no. Ebay was where I got mine too.