Old Oil Removal?

Check out the gunsmithing forum there are some good tips on oil removal if you check back in the history.
 
Try some simple green and move towards solvents if needed.
Even some ballistol might loosen it up if you let it soak for a bit? Fingernail after that or some super fine #0000 steel wool...
 
Ordinary engine degreaser and then rinse in HOT! water. Blow with compressed air if you aren't completely confident the water has evaporated, and oil liberally.
 
Try some oven cleaner on a small area. Maybe an SOS pad.
I use sos pads on my rims and bumpers.

Never use metallic scratchy anything on guns unless you have no other choice. Even green Scotch Brite will take off the manufacturer's finish.
 
Brake cleaner will strip the oil off anything but be careful because it probably won't do your bluing any favours either
 
Back
Top Bottom