Panzer M4 Speed Pro thread

apolloco said:
hey XON50, how did you install your match saver in that position along the handguard? I just picked up the Speed Pro and there seems to be something blocking me from installing the match saver nice and flush. Not sure how to attach photos but here is a link to where I uploaded my image https://ibb.co/MkTL2kvC

I also saw that you've shot some slugs out of it. Are you using the breacher/cylinder choke for slugs? I saw that in the manual, it said to only use slugs with the cylinder choke, and while the breacher choke looks all cool and aggressive, it seems to be a bit obnoxious to take around.

Thanks in advance!
Click to expand...

Mine didn’t come with a breecher choke. Not sure if they do come with them.
I’ve put hundreds of slugs through the installed skeet choke tho
 
Dave_D said:
Mine didn’t come with a breecher choke. Not sure if they do come with them.
I’ve put hundreds of slugs through the installed skeet choke tho
Click to expand...
https://ibb.co/2Yp6zcHW is a link to the breacher choke that came with my Panzer. It has a full choke (one notch), modified choke (three notches), and this big ole aggressive one that I think doubles as a cylinder choke?
 
I think that's also a cylinder choke, but like you said, its big and gets in the way. I had mine on for a while but it adds length and the teeth get caught on everything, especially the case I had it in. I swapped back to a regular cylinder for now until I need to do some door breaching lol.


For the match saver, mine is in that position too, I dont remember what I did but I remember it was a bit of a pain. I think maybe you attach it after the handguard is off and slide it back on with some force?
 
SCnBEER said:
I think that's also a cylinder choke, but like you said, its big and gets in the way. I had mine on for a while but it adds length and the teeth get caught on everything, especially the case I had it in. I swapped back to a regular cylinder for now until I need to do some door breaching lol.


For the match saver, mine is in that position too, I dont remember what I did but I remember it was a bit of a pain. I think maybe you attach it after the handguard is off and slide it back on with some force?
Click to expand...
Thanks! Yeah, I also think the breacher choke is wide enough to be considered a cylinder choke. The issues of the teeth getting caught on things is definitely one of the reasons why I don’t want to put it on. Did you have to buy a separate cylinder choke so you can shoot slugs?

You’re probably right that I need to take the hand guard off to fit the matchsaver on and then put the hand guard back on. Didn’t want to deal with all that fuss as someone pretty inexperienced but I’ll just be careful. Thanks!
 
apolloco said:
Thanks! Yeah, I also think the breacher choke is wide enough to be considered a cylinder choke. The issues of the teeth getting caught on things is definitely one of the reasons why I don’t want to put it on. Did you have to buy a separate cylinder choke so you can shoot slugs?

You’re probably right that I need to take the hand guard off to fit the matchsaver on and then put the hand guard back on. Didn’t want to deal with all that fuss as someone pretty inexperienced but I’ll just be careful. Thanks!
Click to expand...


I use the modified cylinder choke that came with it ( the 3 notches) and its been fine for slugs and buckshot.
 
apolloco said:
hey XON50, how did you install your match saver in that position along the handguard? I just picked up the Speed Pro and there seems to be something blocking me from installing the match saver nice and flush. Not sure how to attach photos but here is a link to where I uploaded my image https://ibb.co/MkTL2kvC

I also saw that you've shot some slugs out of it. Are you using the breacher/cylinder choke for slugs? I saw that in the manual, it said to only use slugs with the cylinder choke, and while the breacher choke looks all cool and aggressive, it seems to be a bit obnoxious to take around.

Thanks in advance!
Click to expand...

Hey,

The match saver is finicky to install. I made sure it was pushed back against the handguard and the mloks had enough space between the rails to tighten in. It took me a few times, but got it on without having to take off the handguard.

Mine did not come with the aggressive breacher choke, I just use the cylinder choke it came with.
 
XON50 said:
Hey,

The match saver is finicky to install. I made sure it was pushed back against the handguard and the mloks had enough space between the rails to tighten in. It took me a few times, but got it on without having to take off the handguard.

Mine did not come with the aggressive breacher choke, I just use the cylinder choke it came with.
Click to expand...
Ahh thank you! Good to know that you didn't have to take off the handguard. I still haven't gotten around to it.

I guess maybe the more recent purchases were paired with the breacher choke. Since SCnBEER has been able to use a modified cylinder choke for his slugs, I shall do the same. Thanks!
 
You must log in or register to reply here.
Back
Top Bottom