Parker hale m82-m87-C3-C3A1 Rifles
- Thread starter delta1
- Start date
Note the Pink shades area were cut out and in the amount shown the Foam insert is AFIK is an orignal issued foam insert. There is only 1 mag cutout in the foam the mag AFIK 1 mag was left in the rifle as evidence in the cut out
Last edited:
delta1
CGN frequent flyer
Savage:
Thank you.Most of the cutouts are self explanatory as to what fit in them some are not I know where the cleaning rod, chamber rod,rifle, extra magazine, cleaning kit, and bipod fit. What are the other cutouts for and which ones?
Regards Tim
Thank you.Most of the cutouts are self explanatory as to what fit in them some are not I know where the cleaning rod, chamber rod,rifle, extra magazine, cleaning kit, and bipod fit. What are the other cutouts for and which ones?
Regards Tim
Any chance that any one on this thread has a spare loading platform and spring? Like what is sticking out of the stock in the pic. My TX has a solid
insert installed. An attempt to stiffen the action, maybe something Parker Hale should have thought of in the first place. The rifle is single shot anyways.But I guess these are the same Spanish Mauser actions as the 1200 series hunting rifles.
Wayne
insert installed. An attempt to stiffen the action, maybe something Parker Hale should have thought of in the first place. The rifle is single shot anyways.But I guess these are the same Spanish Mauser actions as the 1200 series hunting rifles.
Wayne
delta1
CGN frequent flyer
redneck74:
Very nice indeed, what is the unit behind the bipod?I see what you meant about the bolt knob on mine needing one like yours. it would finish it nicely.
Have you had a chance to take her out and make her talk yet. If so how did you make out?
regards Tim
Very nice indeed, what is the unit behind the bipod?I see what you meant about the bolt knob on mine needing one like yours. it would finish it nicely.
Have you had a chance to take her out and make her talk yet. If so how did you make out?
regards Tim
Steve David
CGN Ultra frequent flyer
- Location
- Oshawa, Ontario
finally got some pics of my C3 for the world to see.
Very nice indeed.
delta1
CGN frequent flyer
delta1
CGN frequent flyer
You guys are really hot to trot with this C3A1 stuff, aren't ya
Have at er guys.
If I come across anything else - I'll let you guys know.
Cheers, Carl
I would like a custom sling like your's and a chamber stick along with a parked magazine. does not neccesarily mean as a Christmas present either.
Regards Tim
C3 Question
If a true to spec M-40A3 goes for around $8000.00, and the Unertl scope alone for a C3A1 goes for minimum $3000.00 when found, how much would a genuine C3 with Kahles scope both in the proper CF serial number range go for if found these days?
If a true to spec M-40A3 goes for around $8000.00, and the Unertl scope alone for a C3A1 goes for minimum $3000.00 when found, how much would a genuine C3 with Kahles scope both in the proper CF serial number range go for if found these days?
Hard to find the ZF69 scopes they were destroyed after the C3 was pulled from service and the serial numbers don't mean a thing as they were only applicable to the orginal purchased scopes and not the replacements that entered service afterwards. How do I know this, On my C3 rifle the scope was pulled out of a tri-wall that sent to be destroyed and its serial numbers didn't match those that were supposed to be in the CF serial Number range as well
