PDW builds - Lets see them, and share results

TV-PressPass said:
Psh, you guys and your "AR-15 style firearms"

Back on topic with PDWs!!

10967118036_e8d0191f39_b.jpg


10963640043_a9dd237e99_b.jpg
Click to expand...

Mirror finish magazine? First time I seem in my life. Nice
 
Suputin said:
No because it won't work. You can't retap 28 tip thread to 36 tip thread of the same size without buggering up both. The only solution is to cut off the existing muzzle thread and recut new 1/2-28 thread along with a new crown. Either that or have a conversion sleeve/extension made.
Click to expand...

EXCELLENT Idea ! I scoured the internets and found:

Its a 1/2x36 to 1/2x28 Thread Adapter - its $49.99 SO Im going to give these guys a shout to see if they are OK with mailing this to Toronto.
 



my 10.3 mix a matcher I call it the MK18Mod Barkwell lol KAC lower, upper is a mix of Colt,Larue KAC Surefire in a Gear Sector mount and DD and the only sling to own a Vickers Padded



this barrel is close to being toast.....so this might be my test bed for 300 blk
 
Jamie said:



my 10.3 mix a matcher I call it the MK18Mod Barkwell lol KAC lower, upper is a mix of Colt,Larue KAC Surefire in a Gear Sector mount and DD and the only sling to own a Vickers Padded



this barrel is close to being toast.....so this might be my test bed for 300 blk
Click to expand...

You do realize that you're possibly the only man alive who's definition of "mixmaster" includes KAC, Colt and LMT - right? For most, "mixmaster" means NEA, Norinco and Bushmaster.
 
enefgee said:
You do realize that you're possibly the only man alive who's definition of "mixmaster" includes KAC, Colt and LMT - right? For most, "mixmaster" means NEA, Norinco and Bushmaster.
Click to expand...


is it bad i built it out of my parts bin?
 
all the parts came from my spares bin......well the Aimpoint and lower does double duty on my 16" KAC
 
First up is my franken-build. So far with about 200 rds of Norc, handload, and AE ammo down the pipe it has been flawless.
Parts:
Lower
-Blueline Receiver
-Stag Parts Kit
-Magpul CTR stock
-ASAP sling plate
- Spikes Heavy Buffer
- silicone coated buffer spring

Upper:
-Bushmaster upper receiver
- DD full auto bolt
- BCM med gunfighter charging handle
- S&J hardware 11.5" barrel
- Griffin arms Flashcomp
- YHM blacked out gas tube (carbine length)
- Troy alpha rail (with integrated front sight)
- Bushnell TRS-25


Second is my Ruger 10/22 in Archangel stock and 12" barrel from Mystic Precision
 
Jamie said:
this barrel is close to being toast.....so this might be my test bed for 300 blk
Click to expand...

And here this whole time, me talking about building a 300 I figured you thought I was talking foolishly haha good it will be easier to find ammo if we both run 300
 
Last edited:
Gents

First off thank you to all that constructively contributed to my post.

Its simply amazing what happens to a posts on the board sometimes!! LOL!!

After seeing all these excellent builds, I am now able to contribute something constructive to this post as well!!

A good friend of mine asked me to build a PDW with him.

We discussed the specs at length, and settled on the 7.5" barrel length.

Opportunity was kind to us, and we were able to get all the required parts in short order.

I finished late last night and thought I would share it with you all.

Fist the pictures, with the specs to follow:

75Noveske-s-01_zpsbee6d786.jpg


75Noveske-s-02_zps43cf469f.jpg


75Noveske-s-03_zps83af1c90.jpg


75Noveske-s-04_zps2cee850c.jpg


75Noveske-s-05_zpsbcc1d84c.jpg


75Noveske-s-06_zpsdb32b763.jpg


75Noveske-s-07_zps2f829afd.jpg


75Noveske-s-08_zps81267633.jpg



Upper
  • ATRS Eliminator with Crush Washer
  • Noveske 7.5" Heavy profile barrel with 1/7 twist, M4 cuts, and Noveske pinned Low profile gas block with Barrel nut
  • Pistol length Gas tube
  • Troy Carbine length quad rail
  • Areo precision flat top upper reciver w/ FA & DC
  • NEA F/A B&C
  • Charging handle
  • Centurion Diopter sights
  • Magpul AFG (Gen 2)

Lower
  • Aero Precision Lower
  • DPMS Lower Parts Kit (with undesirable parts replace with higher quality spares)
  • Ambi-Selector
  • Moe Grip+ (rubberized)
  • Gapper
  • KNS Anti-rotation pins
  • Standard Mil-spec Carbine buffer assembly (complete)
  • 3H buffer
  • Magpul CTR mil-spec carbine stock

If things go according to plan, we should have an opportunity to test this one this weekend, with a range report to follow.

There is one note I would like to make. I appreciate that the trend these days is towards slimmer more modular free float tubes with less rails.

However in this case both my friend and I prefer the more substantial older style full quad rail.

Anyhow, Thanks for taking the time to read my post, and I look forward to any constructive comments you might have

Regards and all the best

AbH
 
You must log in or register to reply here.
Back
Top Bottom