pls grizzly drum mag!!??
- Thread starter rally guy
- Start date
forming dies are working well for the drum!install the feed lip and follower tomorrow
[/IMG]
Are these in production yet or still R&D? Cuz I need one for the 8.5 griz mag lol
You know you guys are replying to a post that was made 3 or 4 months ago, we haven't heard from that fellow since. Just don't want to see you guys get your hopes up... hopefully he comes back with some updates as I'd love to see some big mags for the Grizzly.
Yeah. Same thing with rkwprobuilt and a 22 drum mag a could years ago. Even had a naming contest for it, with pics of finished product. Last I'd heard, the CGNer with winning name hadn't gotten or heard a thing after being told it was ready to go to him.
As for the others working on this, probably totally different scenario.
Picked up some of the laser cut parts today for the 20rnd drums![/IMG]
Is that a Steyr Aug? Do you have a prohib license or something?
- Location
- British Columbia, Canada
The dude just wanted to show off his rifle 
From what I've heard, those mag fed Norincos don't even feed 5 shot mags very well, so is a drum mag really feasible?
From what I've heard, those mag fed Norincos don't even feed 5 shot mags very well, so is a drum mag really feasible?The dude just wanted to show off his rifle
So a prohib license? Also, I have one of those Dominion Arms (Norinco) Grizzly Mag (Type 97-2) and I did indeed have problems with them right out of the box. However, once I took it back from the range for cleaning, I noticed lots of gunk in the guts. With the shotgun cleaned, I'm going to check how it performs and report back
=(M-1)=
Regular
- Location
- Southern Alberta.
I'd honestly doubt extended mags will work for these guns. Can you say "jam-o-matic" the stock mags jam bad enough, especially if you don't cycle them fast enough. Higher spring pressure of an extended mag will just jam and jam more. (Or so my experiments have shown) not to mention you end up with a mag as long as a crutch.
Honestly? Get a KSG if you want a high cap pump.
Honestly? Get a KSG if you want a high cap pump.
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
UPDATE! Life happens!
D8 you stopped making them?
Also I'll give you guys a range report on how much it jams after next Sunday
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
I have been doing rimfire drum mags for a distributor when I have time, had a few (too many) bumps in the road of life in the last while and have not had much time for the shotgun drums/mags, sorry all.
hbean
CGN Ultra frequent flyer
- Location
- Surrey, BC
A drum mag on a pump, unless you guys have an extra elbow 
- Location
- Nanaimo, BC
A drum mag on a pump, unless you guys have an extra elbow
Sprayed pop out my nose just imagining this, you sir have made my day.
Went to the range with the shotgun, fed perfectly. I disassembled the whole shotgun, scrubbed the whole thing until it is 100% clean, disassembled the magazine, scrubbed the whole thing until it is 100% clean. If you have feed problems I advise you all do the same and see how far that gets you. When I first got the shotgun there was so much grease it sometimes wouldn't eject properly without smacking the stock against a hard surface, and the grease in the mag accumulated dirt to the point it misfeeds =/
Last edited:
Hotvw1
CGN Regular
- Location
- Lloydminster, Ab.
I have only cleaned the exterior of mine and I haven't had an ounce of problems.
