Possibility of a Canadian Made Bullpup Bolt Action?

So ? How would ya operate the bolt handle ? It would be setting just behind your ear . An extended ( forward ) arm would have to be well engineered to be light and rigid .
Then got to thinking what about a straight pull type bolt example Ross ! I believe this would be the better way to go for a manual operating bolt system . It could even be engineered to be made out of composites( operating arm/rod) .
Huuum!
 
Why hasn’t a manufacturer (like Archangel - hint, hint) cloned a Desert Tech type stock for their product line?
In their current price range, it would be a HUGE hit.
 
I like the idea, it addresses a few really annoying things while hunting. Shooting from standing position offhand with no rest with lightning fast deployment would be a big win. Don’t have that big long stupid barrel hanging out there getting caught on things and hard to keep dead steady. Could have it slung across your chest tight in not flopping around while walking or running with a vickers sling and then rip the strap handle and it’s up in front quickly. Easy to sling across the front while Riding a quad. I just enjoy handing a shorter lighter rifle in general, and having a long barrel in a tighter package. Really an RFB fits this idea well, except it’s semi auto and with that comes some potential reliability issues and added weight. Bolt actions are dead simple, lock up tight, and virtually never fail as long as the ammo is made properly. They are also typically more accurate
,
 
MustangFrank said:
Have you seen the Jard rifles ? But seriously, I would be very interested in buying one. A business currently making chassis systems could incorporate a new design with less cost than starting from scratch but yes it won't be cheap. Someone just has to design it. Plastic mold or aluminum chassis. Its not technically difficult. It just takes a plan and a desire to follow through. Having a supply chain already in existence would be a game changer. MDT ?
Click to expand...

MDT makes chassis not firearms. As has already been noted: a bullpup chassis/ stock is a prohibited device
 
Slimshady said:
Why hasn’t a manufacturer (like Archangel - hint, hint) cloned a Desert Tech type stock for their product line?
In their current price range, it would be a HUGE hit.
Click to expand...

Again. ProMag/Archangel makes stocks - not firearms. A bullpup stock/chassis is a prohibited device
 
I’ve been following this thread, and I have to say that Rick is being asked to build a UNICORN!! I mean, c’mon guys. A precision rifle for 3K. Last I checked AI starts at about 7K for their rifles and goes up to around $9500 for a 338LM. PGW starts around $4500 and goes up. Rick and the guys at ATRS build precision rifles - great ones, but I don’t believe even their conventional PR rigs would go under 3K.

These are Precision Rifle manufacturers. I’m not talking about dropping a Remington SPS in an MDT stock and calling it a precision rifle. Most of the rifles I have been able to find start at about 5K (with a lot of them running in the $6500-$7000 mark). And you guys are asking Rick to create a brand new rifle, from the ground up, for a limited market, for 3K. You’ll forgive me if I find this a little absurd.
 
I like the Desert Tech too but I'd be in for something not overtly tactical. Been trying to get one of these in from Germany without much luck.
010050_KSV_Hunter1.jpg

010050_KSV_Hunter2.jpg
 
KePet said:
I’ve been following this thread, and I have to say that Rick is being asked to build a UNICORN!! I mean, c’mon guys. A precision rifle for 3K. Last I checked AI starts at about 7K for their rifles and goes up to around $9500 for a 338LM. PGW starts around $4500 and goes up. Rick and the guys at ATRS build precision rifles - great ones, but I don’t believe even their conventional PR rigs would go under 3K.

These are Precision Rifle manufacturers. I’m not talking about dropping a Remington SPS in an MDT stock and calling it a precision rifle. Most of the rifles I have been able to find start at about 5K (with a lot of them running in the $6500-$7000 mark). And you guys are asking Rick to create a brand new rifle, from the ground up, for a limited market, for 3K. You’ll forgive me if I find this a little absurd.
Click to expand...

Couldn't have said it better. Everyone want the best for nothing. What's being asked for isn't a savage axis or rem 783 slapped into a chassis
 
gdawg said:
I like the Desert Tech too but I'd be in for something not overtly tactical. Been trying to get one of these in from Germany without much luck.
010050_KSV_Hunter1.jpg

010050_KSV_Hunter2.jpg
Click to expand...

Details? That looks interesting, it looks almost half-bullpup, no? Looks like the trigger on that might be close enough to interact with the bolt without some sort of mechanical linkage?
 
KePet said:
MDT makes chassis not firearms. As has already been noted: a bullpup chassis/ stock is a prohibited device
Click to expand...

I think everyone is aware of that. Thanks. However a company currently manufacturing rifles or chassis, can take that one step further and make a legal integrated chassis / rifle system easier than someone starting from scratch . If it can be made and sold for a profit, there is a market.
 
You must log in or register to reply here.
Back
Top Bottom