Post your Beretta 1301 Tacticals

[mastermind]

Can someone confirm where they purchased the +1 tube extension kits? Do these come as a kit, tube, spring and barrel clamp?
Going to pull the trigger on a 1301 Mod 2 tomorrow.

https://tacord.com/product/beretta-1301-tactical-magazine-extension-kit/

I also recommend Tacord's clamp gasket as a nice touch.

 

[ZREXER]

Any consensus on prefered optic for the 1301? Best budget and best expensive one would be nice to know.

 

[LumberJack13]

Tube extension only. Stock spring works. I ordered the extension and barrel clamp with light rail from sj hardware. Clamp isnt needed but get if u want. Buy ammo!!!!! And lots if it!!

 

[LumberJack13]

Any consensus on prefered optic for the 1301? Best budget and best expensive one would be nice to know.

Im running holosun 510c. Prophet river having vortex open box maybe something from there if a deal

 

[ZREXER]

Im running holosun 510c. Prophet river having vortex open box maybe something from there if a deal

Did you mount your Holosun directly to the factory Pic rail or was any riser required? Does it cowitness with factory sites?

 

[1ABNDT]

Can someone confirm where they purchased the +1 tube extension kits? Do these come as a kit, tube, spring and barrel clamp?
Going to pull the trigger on a 1301 Mod 2 tomorrow.

Here is the ext kit. Use OEM spring.

https://tacord.com/product/beretta-1301-tactical-magazine-extension-kit/

Here is just the mag tube ext, & barrel clamp, pic rail, & qd
https://sjhardware.com/beretta-1301-canadian-legal-magazine-extension/

 

[1ABNDT]

Or go full send kit from S&J

https://sjhardware.com/bayonet-mounting-kit-mk-3-shotgun/

 

[LumberJack13]

Did you mount your Holosun directly to the factory Pic rail or was any riser required? Does it cowitness with factory sites?

Directly on factory rail. Red dot is above factory iron sight so it doesn’t interfere. Forgot the distance i set it at maybe 15metres.

Dont forget the D.S.C. Detachable Shotshell Carrier

 

[ZREXER]

Does the stock on the 1301 have any type of sling mount from the factory? QD or regular type swivel sling point?
Longer term, may upgrade the stock, but would like to use the standard stock for awhile.

 

[Grain]

The Comp model has a rear QD socket, and the new Mod 2 versions have that as well, at least in the States.

 

[1ABNDT]

Does the stock on the 1301 have any type of sling mount from the factory? QD or regular type swivel sling point?
Longer term, may upgrade the stock, but would like to use the standard stock for awhile.

Here an option, depending on where you want your sling point.

ht tps://canadiansafetysource.ca/beretta-shotguns/gg-g-tactical-qd-rear-sling-attachment-beretta-1301-12-gauge-steel-black-gg-g


Or if you want to use the OEM stock & drill a hole & loctite.

https://grovtec.com/products/hollow-stock-push-button-base-gthm198-coming-soon

 

[1ABNDT]

The perfect solution for installing a push button base into thin walled stock that it is not thick enough to support a thread base alone. It's held in place on the inside of the stock by a mating panel nut.

Full-Rotation

Black-Oxide Finish

9/16˝-18 Thread

 

[Grain]

View attachment 900613
The perfect solution for installing a push button base into thin walled stock that it is not thick enough to support a thread base alone. It's held in place on the inside of the stock by a mating panel nut.

Full-Rotation

Black-Oxide Finish

9/16˝-18 Thread

Agreed, they are an excellent QD option for thinner locations. I've also had great luck with their threaded QD bases for heavier/thicker spots.
https://grovtec.com/products/heavy-duty-push-button-bases