fingers284
CGN Ultra frequent flyer
- Location
- Alberta Cowboy Ranges
I should try the phantom glass black. It, and bonded bright chrome are the two polyurethane powders I got, with original mirror black and red baron for polyester TGIC.
The bonded bright chrome works great, thin application and it sticks perfectly hammering test bullets flat. I only narrowly give the edge to the polyester TGIC as the coats seem more uniform and easier to apply free from thick spots. I use a few handfuls of airsoft BBs and maybe a tablespoon of powder in a plastic container.
Certainly much easier than messing with traditional lube, and orders of magnitude cheaper.
Phantom glass black is probably the best powder I have use if I want a good thick coating to increase bullet dia. It will easily add .002 on the first coat and I have multi-coated lots of .452 pistol bullets up to .458 rifle bullet size with it.