If you have any renovations coming up, that's an excellent place to hide the cost of a rifle or two with glass. I ordered our laminate flooring from from PGWDTI
Nice, that gave me a chuckle.
Cheers D
Precision/Sniper/Tactical
- Thread starter Farmboy
- Start date
Nice, that gave me a chuckle.
Cheers D
- Location
- Richmond, BC
The newest round of renos courtesy of Cadex Windows and Glass:
https://4.bp.########.com/-mQhWTuD4hj4/WAmvX4mEvmI/AAAAAAAAkY0/fhKIBduGwjITDSlLIDLeDCWoJIYR5UYTQCPcB/s1600/PA201972.JPG
https://2.bp.########.com/-vdFrAwtUkls/WAmvX7yy3JI/AAAAAAAAkY0/wXW6SUdIbuwT7v5n5EZaNMkZwkpaeJbTQCPcB/s1600/PA201973.JPG
https://1.bp.########.com/-Jzvax1EDNRA/WAmvX8pnTVI/AAAAAAAAkY0/UKEYgNiOlYYJ1csS9ar54Uf0GYn4K3QjQCPcB/s1600/PA201980.JPG
https://2.bp.########.com/-4cL8x1I6IfA/WAmvX9heiqI/AAAAAAAAkY0/WiRxhzkJZPQ5FAtjqSsbwW1gg7VtG4u9ACPcB/s1600/PA201988.JPG
https://4.bp.########.com/-Rc6wLPlc8_0/WAmvXzho0oI/AAAAAAAAkY0/9wo2RdNR5yANq5eBYqMvvFOiwQK4h52eACPcB/s1600/PA201991.JPG
https://3.bp.########.com/-bjNo6sAV_Tk/WAmvX9d9RaI/AAAAAAAAkY0/781ZrNQfTIowfwZ1aXXF4DwI5Z1vQoGqgCPcB/s1600/PA201992.JPG
https://1.bp.########.com/-spDTXZ0NkbA/WAmvXwXgjsI/AAAAAAAAkY0/LdbKDXRLN0MfpiPMWULccYacQcfCcg50ACPcB/s1600/PA201994.JPG
https://2.bp.########.com/-oiTrUCHqquM/WAmvX3TS6uI/AAAAAAAAkY0/9gB830PwVys7AE46PybJyDNb1FuvcycrgCPcB/s1600/PA201995.JPG
https://1.bp.########.com/-UN5WKlLav2s/WAmvXwdNxHI/AAAAAAAAkY0/62iyvnOO8DY0TNqhWE17zcKtgdxfuU_2wCPcB/s1600/PA202005.JPG
https://3.bp.########.com/-0RGUH2EK0uc/WAmvX-OpzkI/AAAAAAAAkY0/MJPPBw-lfUIbS_A4NJVSexzhNzEd77g4wCPcB/s1600/PA202007.JPG
https://1.bp.########.com/-FrhyL_b5HOo/WAmvXzBkSLI/AAAAAAAAkY0/eyo75uLCczEzz0P2Q6uYsV23eO2vZlV8QCPcB/s1600/PA202012.JPG
More photos here:
http://www.canadiangunnutz.com/foru...099-Tremor?p=13109429&viewfull=1#post13109429
https://4.bp.########.com/-mQhWTuD4hj4/WAmvX4mEvmI/AAAAAAAAkY0/fhKIBduGwjITDSlLIDLeDCWoJIYR5UYTQCPcB/s1600/PA201972.JPG
https://2.bp.########.com/-vdFrAwtUkls/WAmvX7yy3JI/AAAAAAAAkY0/wXW6SUdIbuwT7v5n5EZaNMkZwkpaeJbTQCPcB/s1600/PA201973.JPG
https://1.bp.########.com/-Jzvax1EDNRA/WAmvX8pnTVI/AAAAAAAAkY0/UKEYgNiOlYYJ1csS9ar54Uf0GYn4K3QjQCPcB/s1600/PA201980.JPG
https://2.bp.########.com/-4cL8x1I6IfA/WAmvX9heiqI/AAAAAAAAkY0/WiRxhzkJZPQ5FAtjqSsbwW1gg7VtG4u9ACPcB/s1600/PA201988.JPG
https://4.bp.########.com/-Rc6wLPlc8_0/WAmvXzho0oI/AAAAAAAAkY0/9wo2RdNR5yANq5eBYqMvvFOiwQK4h52eACPcB/s1600/PA201991.JPG
https://3.bp.########.com/-bjNo6sAV_Tk/WAmvX9d9RaI/AAAAAAAAkY0/781ZrNQfTIowfwZ1aXXF4DwI5Z1vQoGqgCPcB/s1600/PA201992.JPG
https://1.bp.########.com/-spDTXZ0NkbA/WAmvXwXgjsI/AAAAAAAAkY0/LdbKDXRLN0MfpiPMWULccYacQcfCcg50ACPcB/s1600/PA201994.JPG
https://2.bp.########.com/-oiTrUCHqquM/WAmvX3TS6uI/AAAAAAAAkY0/9gB830PwVys7AE46PybJyDNb1FuvcycrgCPcB/s1600/PA201995.JPG
https://1.bp.########.com/-UN5WKlLav2s/WAmvXwdNxHI/AAAAAAAAkY0/62iyvnOO8DY0TNqhWE17zcKtgdxfuU_2wCPcB/s1600/PA202005.JPG
https://3.bp.########.com/-0RGUH2EK0uc/WAmvX-OpzkI/AAAAAAAAkY0/MJPPBw-lfUIbS_A4NJVSexzhNzEd77g4wCPcB/s1600/PA202007.JPG
https://1.bp.########.com/-FrhyL_b5HOo/WAmvXzBkSLI/AAAAAAAAkY0/eyo75uLCczEzz0P2Q6uYsV23eO2vZlV8QCPcB/s1600/PA202012.JPG
More photos here:
http://www.canadiangunnutz.com/foru...099-Tremor?p=13109429&viewfull=1#post13109429
- Location
- Richmond, BC
Lol, sorry, I go a little nuts with the camera somtimes. I should spend more time shooting my rifles than shooting pics with my camera, but pics are free and ammo for these pigs is extremely costly, lol!
Warning....possibly more pics to come, hahahahaha!
You must be doing some pretty wicked renovations....LOL!
That's a pretty nice kitchen you have there! Have you tried it yet? What do you think of the glass?
That's a pretty nice kitchen you have there! Have you tried it yet? What do you think of the glass?
arcticcathonda
CGN frequent flyer
- Location
- Southern Alberta
The latest toy all put together.
Insite is bringing me in a 6.5X47 Barrel for next years competition season. I will probably actually do some load development for that one.
Nice set up buddy!
I figured I would post my build as I have seen questions about my build come up in other forums. anyways I started with a Remington 700 ACC-SD in .223 16.5" tactical threaded barrel 1-9" twist & Hogue stock, I tossed that stock.
Badger bolt knob installed, Magpul 700 Hunter stock in sniper grey, Magpul AICS magazine kit S/A which was .308cal only, sold the mag as not needed. Bought MDT AICS 10rd mag for .223 which works fine rounds do cycle.
I installed a Blackout 51T muzzle brake but didn't like the looks so switched to the Surefire ProComp .556 muzzle brake which is on the rifle now. Leupold rings & basses for now & Leupold VXIII 4.5-14x40 target scope.
Only thing left to do is measure my overall case length & start working on some loads.
Badger bolt knob installed, Magpul 700 Hunter stock in sniper grey, Magpul AICS magazine kit S/A which was .308cal only, sold the mag as not needed. Bought MDT AICS 10rd mag for .223 which works fine rounds do cycle.
I installed a Blackout 51T muzzle brake but didn't like the looks so switched to the Surefire ProComp .556 muzzle brake which is on the rifle now. Leupold rings & basses for now & Leupold VXIII 4.5-14x40 target scope.
Only thing left to do is measure my overall case length & start working on some loads.
Last edited:
I figured I would post my build as I have seen questions about my build come up in other forums. anyways. started with a Remington 700 ACC-SD in .223 16.5" tactical threaded barrel 1-9" twist & Hogue stock, I tossed that stock.
Badger bolt knob installed, Magpul 700 Hunter stock in sniper grey, Magpul AICS magazine kit S/A which was .308cal only, sold the mag as not needed. Bought MDT AICS 10rd mag for .223 which works rounds do cycle.
I installed a Blackout 51T muzzle brake but didn't like the looks so switched to the Surefire ProComp .556 muzzle brake which is on the rifle now. Leupold rings & basses for now & Leupold VXIII 4.5-14x40 target scope.
Only thing left to do is measure my overall case length & start working on some loads.
i'm still debating that same build in 308, looks awesome!
mebiuspower
CGN Ultra frequent flyer
- Location
- Morontario
6.5x47 Lapua Build
Parts List:
• Surgeon 591 Action
• Jury Custom Barrel 24" 1/8 twist
• Cadex DX2 Trigger
• Insite Arms Heathen Muzzle Brake
• KRG Whiskey 3 Chassis Gen 4
• Atlas Bipod
• Vortex 34mm Precision Rings
• Bushnell Elite Tactical DMR
• Vortex Bubble Level
• SAP Two Rounder
Cerakoting done by Blackbox Customs
Parts List:
• Surgeon 591 Action
• Jury Custom Barrel 24" 1/8 twist
• Cadex DX2 Trigger
• Insite Arms Heathen Muzzle Brake
• KRG Whiskey 3 Chassis Gen 4
• Atlas Bipod
• Vortex 34mm Precision Rings
• Bushnell Elite Tactical DMR
• Vortex Bubble Level
• SAP Two Rounder
Cerakoting done by Blackbox Customs
Last edited:
Tikka Tactical .308 24"
Competition Chassis with skeleton stock
Cadex sling mount
Tab Gear sling
Atlas Bipod
Spuhr Mount 20 MOA
Vortex Razor HD Gen 2 4.5-27x56mm
Almost done. Just waiting for my bolt knob and shroud from Australia and a Insite muzzle break after Christmas and I have been looking for a TRG trigger to get a two stage but I am not having any luck.
Competition Chassis with skeleton stock
Cadex sling mount
Tab Gear sling
Atlas Bipod
Spuhr Mount 20 MOA
Vortex Razor HD Gen 2 4.5-27x56mm
Almost done. Just waiting for my bolt knob and shroud from Australia and a Insite muzzle break after Christmas and I have been looking for a TRG trigger to get a two stage but I am not having any luck.
Look at the CG Xtreme Mod-22, they ship direct to Canada. Pricey trigger but it looks like you've been doing some investing on this projec already!
angrysoldier
CGN Ultra frequent flyer
- Location
- under your bed
where do you get the scope/action covers??
