Project Suggestions

Pistol caliber Kits for the renegade or maverick.
300 win mag, 30-06 long action caliber rifle uppers for the maverick or new rifle all together.
New charging handle for Renegade an maverick.
Bolt catch for renegade
Anything Semi auto in rifle calibers so we aren't stuck looking at wk180s.
Yea a 9mm PCC ..
An ummmm anything that makes liberal tears.
Thanks
 
A real bolt action upper - not spring operated like the Maverick but like a bolt gun.
Barrel extension will need to be replaced for locking lug or a new barrel installed or a complete headspaced upper to fit lower will be great.
 
PCC preferably a big bore
9.9KJ RN-50 style rifle
Short barrel manual (slide, straight-pull, turnbolt) carbine, big bore modern pistol cartridge

Parts kit for hobbyists to turn pipe into non-restricted firearms using basic tools (parts kit could include barrel, FCG, bolt, mag and mag well if applicable, hobbyist uses pipe for receiver/controlled component)
 
No fancy toys for me, just something that's usable, reliable, light enough, but super tough out there in northern Canadian weather, for folks who use their rifles for more than going to the range and shooting paper, steel, and cardboard:

i.e.: free floated, short-barrelled (16-18"), box mag-fed, stainless steel bolt action rifles in .223 Wylde and 308, featuring irons sights and threaded muzzles

Make them available in complete rifle, barrelled-action only, or individual parts options, and make specs available to all the talented mod and small machines shops who will go nuts producing really cool bits for them right here in Canada. Partner up with MDT for multiple chassis options and you have instant international hit, able to weather out semi-auto gun grabs as a hunting and utility rifle.

Super massive bonus: accurate to 1MOA or better. I would pay extra for this alone. If I can put a scout optic on it without ordering a pile of aftermarket add-ons, and still keep my irons on, I will buy at least two in each calibre and become your free product ambassador.

A fella can dream, can't he?
 
Here is what I would like to see, an M203 but chambered in 12 gauge, same controls, same function, just a thinner barrel. If it would be sold with a stock and it all measures over 26 inches it would be non-restricted. The shotgun would be attached to the stock via the picatinny rail, that way it can be taken off and attached to any rifle with a rail on the handguard, just like an actual M203 would be. The stock doesn't have to be anything fancy, just something to keep it NR.


Single_shot_12ga.jpg


If you guys can make this I'm buying 3 or 4 of these.

I honestly think this has potential.

Also, if this could be made with a different stock it could also be sold in the US as a firearm, just like the shockwave or the tac14, without it being an SBS, huge market.
 
P12 said:
Here is what I would like to see, an M203 but chambered in 12 gauge, same controls, same function, just a thinner barrel. If it would be sold with a stock and it all measures over 26 inches it would be non-restricted. The shotgun would be attached to the stock via the picatinny rail, that way it can be taken off and attached to any rifle with a rail on the handguard, just like an actual M203 would be. The stock doesn't have to be anything fancy, just something to keep it NR.


Single_shot_12ga.jpg


If you guys can make this I'm buying 3 or 4 of these.

I honestly think this has potential.

Also, if this could be made with a different stock it could also be sold in the US as a firearm, just like the shockwave or the tac14, without it being an SBS, huge market.
Click to expand...

I would buy a shotgun I could clip to a rifle. You guys should totes make one.
 
You must log in or register to reply here.
Back
Top Bottom