I pulled this out of an access to information request posted to Reddit. It's a draft policy from the RCMP on how to identify Mauser C96 pistols that meet the requirements to be antique. There is also an earlier note doing the calculation for serial range.
Here's the summary and antique characteristics:
1) Serial number - It all depend on how many pistols were produced per day. At the high end it is 19 per day, at the low it's 8 per day. The RCMP seems to prefer the low end number but that still puts the upper end of serials at 5442
2) Trigger Style - sub-assembly with attached floorplate, large round trigger face
3) Pre-production spur hammer or cone hammer
4) Upper receiver markings
5) Extractor style - Long straight and thin
6) Firing pin retainer - Dovetail block
7) Rifling - 4 groove rifling
8) Bolt Locking Lug - Single locking lug
9) Sight attachment - Fixed rear sights or adjustable with cross pin
Here's the summary and antique characteristics:
1) Serial number - It all depend on how many pistols were produced per day. At the high end it is 19 per day, at the low it's 8 per day. The RCMP seems to prefer the low end number but that still puts the upper end of serials at 5442
2) Trigger Style - sub-assembly with attached floorplate, large round trigger face
3) Pre-production spur hammer or cone hammer
4) Upper receiver markings
5) Extractor style - Long straight and thin
6) Firing pin retainer - Dovetail block
7) Rifling - 4 groove rifling
8) Bolt Locking Lug - Single locking lug
9) Sight attachment - Fixed rear sights or adjustable with cross pin
Last edited:


















































