Recommendations for a "3 Gun" Gun?

Not the best choice...
Cylinder bore... will result in FAIL at most matches...

After shooting that 3 gun at Guelph last fall with a defender and cylinder bore I agree. For $100 I had my defender threaded for chokes. What a difference now. I've talked with a few 3 gunners running the 590 and they are threading the barrels as well.
 
After shooting that 3 gun at Guelph last fall with a defender and cylinder bore I agree. For $100 I had my defender threaded for chokes. What a difference now. I've talked with a few 3 gunners running the 590 and they are threading the barrels as well.

So it's the distance/range?
 
Gentlemen, thanks for your input as it's putting me in the right direction.
Re: choke vs cylinder....
Any disadvantage to using MC or IC over cylinder?
 
zero7one_SHOT_Show_2011_Mossberg_500_Chainsaw_001.jpg


OR

Mossberg_Roadblocker.jpg
 
Here is my Turkey Tenderizer


*Click On Photo's For High Res Pic's*

Still looking for the 11 round extender as the 9 is nice but 13 would be ideal!
;)
 
Welcome to a new disease called 3 Gunning. I have used a 590 pump and then Remy 1100 and Beretta 1201 all for 3 gunning. Go with a semi, if you ever have to shoot from the prone pumps suck large. In Canada, yes the pumps have a shot advantage but a fast shooting semi is the way to go for me. Cylinder shoke doesn't get the job done in my eyes. I see many shooters needing to take two and three shots to knock a plate down while a shooter with a choke blows them away everytime with one shot if they do their job. I/C is what I use and it does me fine.
 
I have never shot a 3 gun match where clay targets were far away, do you see them far away at the US matches?

Clays are not the problem... :D It's all the steel.
Most of the shotgun targets engaged at "club" matches I attend are steel and at any major match it's pretty much 99% steel.

Poppers, plates... They all need to be knocked down hard and fast

Almost impossible to achieve consistantly with a cyl bore.
'Just sayin'.
 
So it's the distance/range?

No...Nooooo...Nooooo...

It;s the target(s)

The 3-gun match DeBeato speaks of had as part of one stage a "Texas Star"...

The distance to the target was perhaps 15-20 yards...

Those shooters runnin' their cyl. bore shotguns experienced great difficulty when it came to knocking the plates off...

Like I said.. steel needs to be hit hard... You need to land that entire shot column, or at least most of it on target.

Hitting a popper with 12 #7 or #4 pellets just ain't gonna empart enough energy to knock that ##### over...
 
No...Nooooo...Nooooo...

It;s the target(s)

The 3-gun match DeBeato speaks of had as part of one stage a "Texas Star"...

The distance to the target was perhaps 15-20 yards...

Those shooters runnin' their cyl. bore shotguns experienced great difficulty when it came to knocking the plates off...

Like I said.. steel needs to be hit hard... You need to land that entire shot column, or at least most of it on target.

Hitting a popper with 12 #7 or #4 pellets just ain't gonna empart enough energy to knock that ##### over...


[youtube]NkhcvY2ysjs[/youtube]


That was done with a 28inch bbl 870 express with number 7 1/2 shot light target loads. the star was 20+ feet away. I had the remington "breacher" choke in which is cylinder bore. My bbl is threaded though.
 
Actually I find the saddle round holder nicer & faster to use than the speed feed although it is quicker loading compared to loading from the hip.

so what your telling me is not to waste my money on a 100 dollar stock when i can get a 50 dollar on that would do the job nicely?
 
That was done with a 28inch bbl 870 express with number 7 1/2 shot light target loads. the star was 20+ feet away. I had the remington "breacher" choke in which is cylinder bore. My bbl is threaded though.

20ft...? Far cry from 15-20 yards...

That's fine, but... If you run into a Texas Star that has stiffer mounts or heavier plates.

My point is... If you know for sure you're only gonna run into clays and weak steel then sure... Go with cyl. bore. if that's what you like

But if you think you might venture farther than your own backyard I'd say err on the side of a tighter pattern and spend a little $.

Surf the shotgun section at Enos for some informed input on what works best for the game
http://www.brianenos.com/forums/index.php?showforum=49
 
My preferred set up for Canada is the Benelli Supernova

I have a +7 extension so it can fit 11 rounds in the tube +1 in the chamber.
24' barrel
I have modified the loading port, opened it up, and my reloads are effortless.

I agree with the requirement for chokes.
I use a light modified for pretty much everything except stages where I encounter mostly clays at reasonable distances.
There I toss in cylinder to open up the pattern a bit.

I think the nova/supernova have many advantages over remington/mossberg.

for the US, Benelli M2.
Lightened bolt carrier, opened up loading port, extended lifter to avoid "benelli thumb"

both shotguns have bead sights for faster target acquisition.
I find ghost ring too slow.

I would suggest searching on some of the US sights for similar discussions.
They are way ahead when it comes to playing around with the shotguns
 
Back
Top Bottom