Resurrecting a Cooey (35)!

[cyclone]

So, long story short, was out to refinish a Cooey 35, but:

....got the retractable/moveable part of the mag-tube rod jammed in the chamber (and now cannot remove the feeding/inner rod). Ideas?

I'll take it to my gunsmith sometime this week, if I can....

 

[saskgunowner101]

Are the guts of these the same as Cooey 60??

 

[cyclone]

Are the guts of these the same as Cooey 60??

Pump-action, not bolt....and the action is not fully contained in the stock anyhow, which makes me think there is way too much unbalanced - but who am I to judge?

Still looking to free the chamber of that mag-rod!

 

[saskgunowner101]

Whew! Had me worried for a second! I was thinking if they were similar, that you really had to work on it to even do that.

 

[cyclone]

Yea, well....my Cooey 60's still okay...just needing the 35 up and running!

Edit: managed to fix it on my own! WD-40'ed the bolt that fits into the stock, loosened and removed the washer, and lowered the whole tube-mag assembly, then pulled out the mag-rod successfully....re-attached it all, then fed back in the mag-rod. Hurrah!

Sprayed down the entire action with WD-40...much better now!

Just need to fix the light-strikes on the firing mechanism...and maybe hog-out the stock...the metal doesn't seem to sit right?