Ruger SR22

Yes, there is a very good chance :)
IMG_6288_zps4f2c23e1.jpg

IMG_6285_zps879efe92.jpg

IMG_6293_zpsc3fa01b1.jpg


Any screw-on AR-15 free float hand guard will fit
 
Does it use the existing delta ring/castle nut?
Obviously my google-fu leaves something to be desired as I couldnt find any legit website involving this topic!

Any specific parts needed to attach?
 
Dave Mishchenko said:
TomEGun, what's the overall length with your bottom 2 configurations?
Click to expand...

Hi Dave;
The middle one is just slightly over 26" IIRC, the bottom one is slightly longer - maybe 26 1/2". I can check when I get home tonight if you would like the exact length. All 3 configurations use the same 8" Dlask barrel, but the shroud on the lower one projects about 3/8" past the end of the barrel.

TEG


UPDATE: I just measured them, configuration #2 (middle pic) is 26 1/8", configuration #3 (btm pic) is 26 7/8"
 
Last edited:
Thanks - I was just looking to find out if it was still over 26. I'm assuming that's why you went with the fixed stock.

Tom E Gun said:
Hi Dave;
The middle one is just slightly over 26" IIRC, the bottom one is slightly longer - maybe 26 1/2". I can check when I get home tonight if you would like the exact length. All 3 configurations use the same 8" Dlask barrel, but the shroud on the lower one projects about 3/8" past the end of the barrel.

TEG
Click to expand...
 
MadMarty said:
Does it use the existing delta ring/castle nut?
Obviously my google-fu leaves something to be desired as I couldnt find any legit website involving this topic!

Any specific parts needed to attach?
Click to expand...

The front assemble on the SR22 has a threaded end that the Ruger HG base threads on to, and then the locking ring, and the the HG 'tube' itself. From the factory, Ruger tends to use a fair amount of locktite on the threads between the front assy and the HG base.

Once you separate these parts, then like TEG said, any AR part will thread on. With the 2-part dealie I posted above, you need a AR delta ring assy which just screws on. You'll prob need an AR tool to correctly index the D-ring so your 2-part HG is aligned.

Then its just the HG and front cap. I have used a screw-on AR FSB for a HB (.750 dia) butted against the HG end cap, which supplies enough friction to keep the HG from sliding forward.

Here's a SBS:
http://www.canadiangunnutz.com/foru...-AR22-Project-finally-Complete-Updated-photos
 
Answers in blue:

Mr. Friendly said:
hey Tom, some questions!

what rails do you have on the stock handguard? Dlask top & bottom rails
what brand of angled foregrip is that? Magpul AFG
what scope is that? It is a no-name-brand illuminated 1-4x scope I bought used on the EE for $80, I think the seller said it came from Corwin Arms
what buttstock is that?DOUBLE STAR - ACE AR-15 ARFX SKELETON STOCK

I totally love how that looks!!! Thanks!
Click to expand...
 
can some give me there imput as to the full length barrel mods that are out there.I got one last year and seen there was some heavy barrel options out there but never had a chance to keep up with how they worked.I would like to put one in my SR22.Could someone give me there ideals as to the best option that worked for them. thanks
 
You must log in or register to reply here.
Back
Top Bottom