Scorpio Bolt Action Rifle .22lr 13"

[speed23]

Edit

 

[speed23]

Ordered mine today from FOC. "Free" Extra mag through them compared to Tenda. Just read all the modification threads and ready for another Rimfire rebuild project.

No mention of sending my DL at this point.

Does the one from FOC come with the Pic rail on top also? It doesn't show it in the pic from FOC.

 

[Jahnj0584]

Does the one from FOC come with the Pic rail on top also? It doesn't show it in the pic from FOC.

yes, the 13" barrel one does.

 

[Beeron]

Takes about 16 inches for a full powder burn

Deleted

 

[45CAT]

Does the one from FOC come with the Pic rail on top also? It doesn't show it in the pic from FOC.

Mine did but it was a b$gger to fit. I had to use a persuader. Only one mag.

 

[Arcosdad]

I got one earlier from Marstar. Pretty nice little rifle and a great shooter.

 

[Jahnj0584]

Mine did but it was a b$gger to fit. I had to use a persuader. Only one mag.

Yeah i also had to add a chamfer on their slot in order for the rod to fit in.

 

[klondike bob]

If the pic is right, it comes with an extra piccy rail and upgraded bolt knob.

If I buy a 20" one for 199 and cut it down to 13" to save 50$,I'm going to jail aren't I?

whit any LIEBERIAL (LIBERAL ) in power I would NOT trush them owning a barrel under 18,5 inches ,

 

[wolf300H&H]

Damn .... that’s ugly like Dr Tam

 

[FatCatsDad]

If the pic is right, it comes with an extra piccy rail and upgraded bolt knob.

If I buy a 20" one for 199 and cut it down to 13" to save 50$,I'm going to jail aren't I?

I'd advise against it, it's Illegal for sure, but ....Chances of getting are slim if done nicely.
Barrel lengths are generally not stamped on a gun.
So who's to say how long the barrel originally was.
Same as short shotgun barrels.

 

[Jahnj0584]

I'd advise against it, it's Illegal for sure, but ....Chances of getting are slim if done nicely.
Barrel lengths are generally not stamped on a gun.
So who's to say how long the barrel originally was.
Same as short shotgun barrels.

I already got the gun, shot it at mapleseed, designed and made a stock for it and have sold it since I asked haha. After shooting 150y in wind, I got a lil frustrated with the lower velocity and flipped it. On the hunt for a nice 18" CZ now!

 

[vcarriere]

Anyone know what are the threads on this one?

 

[Jahnj0584]

Anyone know what are the threads on this one?

1/2-28 off the top of my head. It was already posted in the Scorpio thread.

 

[45CAT]

There’s another thread on this gun. Turns out its a decent little shooter. So far the only problem seems to be getting the rail in place, I had to use a “persuader”

 

[Jahnj0584]

There’s another thread on this gun. Turns out its a decent little shooter. So far the only problem seems to be getting the rail in place, I had to use a “persuader”

The issue is the slot size for the screw. I added a chamfer and all was right again in the world.

 

[Deadbeat]

1/2-28. It was already posted in the Scorpio thread.

Mine wasn't. It was 1/2 x 20.

 

[urbaneddy]

thread pattern

Mine wasn't. It was 1/2 x 20.

That is correct, diameter is the same, so it initially fits the first thread then binds up.