A component purchase this morning from T.E.C Trade Ex brought back the reasons and

logic behind my purchase of what I plan on using for spring Black Bear. When I decided to acquire a 9.3x62,

.366 Wagner, I decided to get one in a full wood Mannlicher style. A style of rifle I like, but
only in European calibres. I picked up an 'inexpensive' Zastava, and was
AMAZED at the accuracy with my first couple of handloads and using bulk 285gr prvi SP bullets!!! Prior to getting the rifle, at gun shows primarily, I acquired a decent selection of bullets, brass and set of dies. I never got any further than the initial handloads with the 285gr prvi bullets, IMR 4320 or IMR 4064 and Lapua brass. Groups at 100yds of under 1"!! Can't see me doing any better, considering the rifle quality level and that of the prvi bullets. Anyway, a call to Trade Ex, I decided to increase my inventory of prvi bullets and picked up the last 200 they had. Also found out, apparently they no longer have any 9.3x62 M-70 full wood carbines. Oh, the components I've gradually accumulated, primarily at gun shows are;
- 285gr prvi bullets
- 286gr Barnes TSX FB "
- Norma 231gr "
- Norma 286gr "
- Speer 250gr "
- 290gr Martix " (since traded to a friend)
-Lapua brass New brass
- Norma brass Once fired
Now,

to 'convince' my lady

.