sources of 10mm ammo in canada?

[oldblue69]

Hello all,

I have found target ammunition, (pmc, American eagle) but would like to buy some heavy (200gr+), underwood or buffalo bore, in hard cast, Sig Sauer flat point jacketed, Nosler Flat point jacketed in fmj.

Availability seems to be fleeting these days.

I will eventually roll my own 10mm (already do for 9mm) but want reliable factory loads to start with.

Any suggestions?

Thanks,
C.

 

[Still alive]

I have found the same ammo ( AE) as you. Never seen anything more exotic. Since 10mm full load ammo is best suited for handgun hunting or defensive purposes and the caliber is not the most popular in Canada, although that seems to be changing, I doubt many LGSs will carry the more high powered exotic stuff for budgetary reasons alone. Rolling your own is probably the best option.

 

[Shooting Centre]

Hornady produces 10mm 180gr JHP ammo. We stock it fairly regularly. It is however more expensive than the AE ammo indicated above.

 

[Craig0ry]

edit: I should learn to read better

 

[remyltr]

i just stumbled across this stuff
https://durhamoutdoors.ca/collectio.../hornady-10mm-auto-180gr-jhp-xtp-20-round-box

 

[madcow]

Been shooting 10mm for decades, good luck on your search. Havent seen any decent factory at a good price in ages.

best option is loading your own, as 40sw components aren't that expensive, all you need is the brass.

PM me when you start loading it, or need advice. Got a lot of pet loads that you would like

1000 rounds will cost you approx $220 minus brass costs

 

[B]

The hottest 10mm you will find in Canada reliably is the Hornady 180 xtp. Still runs 200-250fps slower than my hand loads.

 

[my72jeep]

I just acquired a 10 mm and at $50+ a box I need to reload. You say 40 leads work? Is there a 10mm die or 40also? Oh the questions I have

 

[polskiogorki]

I just acquired a 10 mm and at $50+ a box I need to reload. You say 40 leads work? Is there a 10mm die or 40also? Oh the questions I have

Same die for 40 and 10.I had Dillon dies for my 10mm and was marked 40 or 10mm

 

[oldblue69]

Thanks this is closer to what I was looking for. I'm trying to work toward not having to carry a S+W 460 and need to find some heavy hard loads.

i just stumbled across this stuff
https://durhamoutdoors.ca/collectio.../hornady-10mm-auto-180gr-jhp-xtp-20-round-box

 

[oldblue69]

I have lots of titegroup and Hs6, looking into 800x as I will be single stage loading this caliber and weighing every charge...

 

[madcow]

My personal preference 4756 (discontinued, I have a few pounds left), but 800x is a good 10mm powder

 

[350 Mag]

I like 200 gr Horn XTP over hand metered max load of 800X...

Another favourite is 180 Rem Golden Saber over max load of Bluedot....very accurate out of my EAA Witness.

 

[Boomer686]

Wanstalls carries the buffalo bore loads as well.

 

[rodregier]

Longshot is my go-to powder for 10mm with 180g projectiles. Meters just fine.

 

[lowridersvt]

Bass pro just had a sale on it sale just last week 31$ a box for Remington um. Got 500 rds

 

[y2k]

10mm brings back a lot of memories. Had a S&W 1006 that ran around 20000 rds without a single breakage It was probably best pistol I ever owned. Had a Colt Delta Elite which was a joke and real disappointment replaced extractor, slide stop front sight twice back strap was plastic so was Trigger therecoil spring guide rod was also plastic. But it shot strait I usually loaded 180 grain lead at 1000 fps. Brass I ran till lettering on case head faded. Colt I got rid of through a store in Calgary and a friend I later made was the guy who bought it he too had problems with it but the S&W 1006 was a real champ and the 20000 rds is not an exaggeration

 

[350 Mag]

I just ordered some Underwood 10mm in 200gr hardcast lead.

Cannot wait to Chrono it....

 

[hbar2]

Who sells Underwood??

 

[350 Mag]

Who sells Underwood??

Sorry....I ordered from Irunguns.... apparently they can import it ...ordered 1 box just to test-drive the process....