Spectre Ballistics Light Practical Carbine - NR Receiver Set

[SpectreBallistics]

And $800 for the receiver set. Very reasonable. Thanks for that. You're doing good stuff in Sherwood Park.

Would you say that someone who could assemble an AR could assemble this from parts gleaned from a horrible-evil-kill-the-most-people rifle? I'm assuming it'll be kinda plug-and-play like the AR, yeah?

This rifle is designed to be plug and play. It's very easy to assemble.

 

[mclmm]

And $800 for the receiver set. Very reasonable. Thanks for that. You're doing good stuff in Sherwood Park.

Where / when was the price confirmed?

 

[Paul_T]

Where / when was the price confirmed?

https://spectreballistics.com/18-all-products

 

[SpectreBallistics]

Where / when was the price confirmed?

On our website as of 4pm MST Thursday

https://spectreballistics.com/19-lpc

 

[mclmm]

Thanks!

 

[SaskatchShooter]

Will these be able to use standard AR15 vise blocks for assembly? Sorry if this has been discussed before. I searched the thread and couldn't find anything.

 

[SpectreBallistics]

Will these be able to use standard AR15 vise blocks for assembly? Sorry if this has been discussed before. I searched the thread and couldn't find anything.

Nope. We a producing one which you can buy from us or 3d print your own. Soft or non-marring bench vise jaws also work fine since the upper is slab sided.

 

[SaskatchShooter]

Nope. We a producing one which you can buy from us or 3d print your own. Soft or non-marring bench vise jaws also work fine since the upper is slab sided.

That is awesome, thank you.

 

[Geoff B]

Where can I get a barrel wrench for a Colt Canada Integrated Upper Receiver? Even a drawing of one as I have a machinist friend who might make one for friends in Victoria to use.

 

[polkey]

Where can I get a barrel wrench for a Colt Canada Integrated Upper Receiver? Even a drawing of one as I have a machinist friend who might make one for friends in Victoria to use.

https://www.nordicmarksman.com/IUR-Barrel-Nut-Wrench.html

https://truenortharms.com/ar15_default_store_view/proprietary-colt-iur-barrel-nut-wrench.html (out of stock though)

 

[tharkhold]

Nope. We a producing one which you can buy from us or 3d print your own. Soft or non-marring bench vise jaws also work fine since the upper is slab sided.

3d print eh? Nice

 

[Geoff B]

https://www.nordicmarksman.com/IUR-Barrel-Nut-Wrench.html

https://truenortharms.com/ar15_default_store_view/proprietary-colt-iur-barrel-nut-wrench.html (out of stock though)

Thanks, polkey. Not cheap, but I guess there isn't a large market.

 

[b_w.]

In for sure!

 

[Fisselig]

Could you tell us what the weight of the stripped receiver set and the bolt carrier is? Really curious as I am into building lightweight rifles.

 

[Charlie9000]

Did SBI send out a newsletter email about this?

 

[Snowmaker]

I signed up for their newsletter and alerts but didn’t receive anything

 

[Geoff B]

I have two questions about serial numbers (assuming they will have them).
Will the number be on both upper and lower or lower only?
If I buy two sets, will they have consecutive numbers?

 

[IMR4320]

So, a technical question here, is the bolt carrier spring loaded to naturally move forward ?

 

[tiriaq]

So, a technical question here, is the bolt carrier spring loaded to naturally move forward ?

No.

 

[tharkhold]

So, a technical question here, is the bolt carrier spring loaded to naturally move forward ?

wouldnt that make it a semi automatic action??