Brendon292
CGN Regular
- Location
- Kingston, ON
Received mine today. I'm very impressed. The fit and finish is excellent. Assembly was straight forward. Going to try and get it out to the range ASAP.
Spectre G3 10/22 Chassis
- Thread starter SpectreBallistics
- Start date
- Location
- Sherwood Park, AB
We're glad you like it!
Can’t wait to get to the range! Can someone recommend some decent common 22lr ammo to get at canadian tire? Thanks Spectre Ballistics 
Looking good!View attachment 985061I love the G3 chassis! Just got mine in the mail! Dropped in the st-22 receiver. Put on my Occam defence Hex 2.0 fixed stock and slapped on a Kahles k16i 1-6x LVPO. MDT walnut pistol grip. Overall length at a cool 27ish”
Canadian Tire is expensive for ammo. Maybe just grab a couple boxes of Mini-mags.
- Location
- Sherwood Park, AB
Anodizing Update: We're still waiting unfortunately. We have reached out to our anodizer to get a completion date. As soon as we know it we will share. We understand this is frustrating, but rest assured everyone who ordered a tanodize chassis will get one.
Unforeseen delays such as this are why we will no longer do pre-orders.
Unforeseen delays such as this are why we will no longer do pre-orders.
Is this update for batch 3?
I'm not sure but I believe I was the last one to order before you stopped taking pre-orders. Am I in batch 3 or is there a batch 4?
Also patiently waiting for some black ST-22 receivers to come in stock. An update on those would be nice. Thanks!
- Location
- Sherwood Park, AB
We should have enough extra chassis in batch 3 to cover all of batch 4.
ST-22 receivers are being made now and will be going to anodizing later this week.
- Location
- Sherwood Park, AB
Today we got on the horn with the anodizer to get an update regarding tanodize and why it's taking so long.
They are currently anodizing the parts, however due to the nature of the process and dye they only do a couple at a time in a small tank.
This and limited tank availability has caused the delays. With their current progress they expect to be finished early next week.
As soon as they are done we will pick them up and begin shipping. We truly appreciate everyone's continued patience regarding the delay with tanodize. The chassis is worth the wait!
They are currently anodizing the parts, however due to the nature of the process and dye they only do a couple at a time in a small tank.
This and limited tank availability has caused the delays. With their current progress they expect to be finished early next week.
As soon as they are done we will pick them up and begin shipping. We truly appreciate everyone's continued patience regarding the delay with tanodize. The chassis is worth the wait!
- Location
- Sherwood Park, AB
Good news, Tanodize is finished. Shipments will begin going out tomorrow morning.
If you are waiting for tanodize you will automatically get a tracking number when your order ships. Please do not email us asking for the tracking number. We will not reply until every order is shipped.
If you are waiting for tanodize you will automatically get a tracking number when your order ships. Please do not email us asking for the tracking number. We will not reply until every order is shipped.
- Location
- Sherwood Park, AB
Shipments of pre-orders are continuing and will hopefully be finished soon.
We have a small number of extra chassis from batch 3 / 4 that are now available to order. They will not ship until all pre-orders are shipped. Pre-orders obviously get priority.
We have a small number of extra chassis from batch 3 / 4 that are now available to order. They will not ship until all pre-orders are shipped. Pre-orders obviously get priority.
I saw your black ST-22 receivers were in stock so I ordered one and another magazine. If you can combine that order and my chassis order the email used was <REDACTED>
Thanks!
Last edited by a moderator:
- Location
- Sherwood Park, AB
Pre-orders have now all been fulfilled with the final shipments going out today. We would like to thank everyone who pre-ordered our G3 10/22 chassis. We look forward to seeing everyone's builds!
Moving forward we will not be accepting pre-orders. We do have a limited number of chassis available on MagDump.ca.
For handguard enclosures, we have some being anodized now. They will be available very soon.
Moving forward we will not be accepting pre-orders. We do have a limited number of chassis available on MagDump.ca.
For handguard enclosures, we have some being anodized now. They will be available very soon.
I just got my chassis in the mail this morning.
It is a thing of beauty - very well machined and finished.
It just about put itself together too!
I look forward to getting to the range with this new setup.
Edit 16Aug.
The SBI chassis works well with their short pencil barrel and Dlask linear compensator. Magpul k grip and CTR stock makes the rifle lightening quick to shoot the steel plates and the Vortex Venom 3 MOA allows the smallest of silhouette targets to spin. The factory mags fall free and the gun is easy to shoot! Thanks again SBI.
..
It is a thing of beauty - very well machined and finished.
It just about put itself together too!
I look forward to getting to the range with this new setup.
Edit 16Aug.
The SBI chassis works well with their short pencil barrel and Dlask linear compensator. Magpul k grip and CTR stock makes the rifle lightening quick to shoot the steel plates and the Vortex Venom 3 MOA allows the smallest of silhouette targets to spin. The factory mags fall free and the gun is easy to shoot! Thanks again SBI.
..
Attachments
Last edited:
- Location
- Sherwood Park, AB
We're glad you like it! Post some pics when your build is done.
- Location
- Sherwood Park, AB
We are now out of stock on all chassis.
Batch 5 is in production, however we are not accepting any pre-orders at this time.
Batch 5 is in production, however we are not accepting any pre-orders at this time.
Last edited:
Finally got it all put together...
Build details:
- SBI G3 Chassis. Tanodize.
- SBI ST-22 receiver with AR style top charging handle.
- Kidd bolt, firing pin, springs, extractor.
- Dlask 16" heavy, fluted barrel.
- Daniel Defense stock and grip. Vortex mount. (All custom Cerakoted. Pulled them off another rifle.)
- Volquartsen TG-2000 trigger group with auto bolt release and rapid mag release.
Build details:
- SBI G3 Chassis. Tanodize.
- SBI ST-22 receiver with AR style top charging handle.
- Kidd bolt, firing pin, springs, extractor.
- Dlask 16" heavy, fluted barrel.
- Daniel Defense stock and grip. Vortex mount. (All custom Cerakoted. Pulled them off another rifle.)
- Volquartsen TG-2000 trigger group with auto bolt release and rapid mag release.
Last edited:
durtyhairy
Member
- Location
- BC, Canada
Can you tell me what the length of the chassis is? Trying to plan a build but need that dimension to figure out minimum barrel lengths if fixed stocks are used.
It's 18 inches... or a mm or 2 shy. Too lazy to take the stock off the get exact measurement.
durtyhairy
Member
- Location
- BC, Canada
Awesome. Thank you for doing that. Beautiful build you got there!It's 18 inches... or a mm or 2 shy. Too lazy to take the stock off the get exact measurement.
