Sub2k Gen2 Sight Upgrade Upgrade

L

Leaf

Member
Rating - 100%
1   0   0
Hey folks figured some of you might be interested on my trails of getting a decent sight onto the sub2k. When I first got the sub 2k I thought this plastic rear sight has to go, so I order up a tanderkoss metal rear peep sight and upgraded. The pin it came with was .100" larger in diameter than the stock one, and the flip up handle plastic. Needless to say I was unwilling to make my sight pivot holes large so I used the factory pin and drilled a small indent into it for the set scew to hold onto. I thought this was a great idea because there where gaps on either side of the sight and I didn't want it to drift. After multiple open/closing and firing the soft aluminum hole I made got larger and larger and the sight became loose and would drift.

So I decided to upgrade my upgrade and got a performance services rear peep sight. The sight is all metal, pin with lever is all metal, set screw is much larger 8-32, fit is snug with no gaps and there is a flat machined surface onto the pin to prevent slippage of the set screw.

Pic of Performance Services Sight


All 3 sights lined up


Im very happy with the new sight, it feels solid, all in it costed $107.
 
Last edited:
Thanks for the info! Ive been thinking of doing something about my factory sight. recently i just replaced all the trigger springs and the trigger itself with an aluminum one, its great.
 
nhopkins said:
Thanks for the info! Ive been thinking of doing something about my factory sight. recently i just replaced all the trigger springs and the trigger itself with an aluminum one, its great.
Click to expand...
Where'd you get the trigger and springs from?
 
M-Carbo out of the US. they were really good to deal with, I also got the aluminum trigger guard as well it really made a difference (aesthetically) getting rid of some of the sharp plastic.
 
You must log in or register to reply here.
Back
Top Bottom