The "What Have You Reloaded Today" thread

[Trinimon]

30rnds of 308 from 41.5gr in 0.5gr increments. Need to retest these loads.

 

[Hoag]

150 Rounds of 9mm (124g CamPro HP / 3.8g VV N320)

While this is not terribly impressive in and of itself, this is the first batch of reloads on my brand new Dillon RL550B! It took a while to "fine tune" things, and to get comfortable not doing one round at a time on a Turret Press, but it really didn't take too long before I realized what a good purchase the RL550B was.

 

[bsand]

30 rounds 41.7 4064 175 gr smk producing solid 3/4-1/2 moa groups. Has a SD of 12.8, but good enough for my needs. After Henry opens up again I'll start experimenting with more 8208 xbr had an SD of 6.8!! Group was about an inch tho. Will play with oal next.

 

[Sqr]

65 cartridges of 110 gn .30 Herrett AR.

 

[leveractionjunkie]

Them last two look hungry for a bullet too

 

[PitBull1973]

Im tumbling 150 LC 308 cases for a PR match
175 SMKs
42.5 grs of 8208 XBR
CCI BR primers
Seated At 2.805
To be used with my LMT

 

[Sqr]

Them last two look hungry for a bullet too

I was just taking a picture of the case capacity differences of an SSA and Hornady brass charged with 30.0 grns.

 

[6mmrem]

Neck sizing .22 hornet brass

 

[bsand]

loaded up 175 smk 4064 41.7 in lapua brass for some 300-600m practice tomorrow!

 

[Armored Metal]

100X .45ACP, 230g Zero, 6.2g CFE Pistol, CCI large primers.

 

[Keithjohn]

30 more 7.5x55 in gp11 brass with 175 gr Berger @ 46gr imr 4350 seated 10 thou off the lands ,made repeated 1in groups out of my old k31

 

[Brutus]

Experiment:
50 caliber and 58 caliber round ball for a buck & ball 10 gauge BP hand load in a brass shotgun shell.
Turns out the 58 shot more to point of aim then the 50 RB hand load @25 yards.

The buckshot was three .375 balls over top the single larger one for both loads.
Both loads were propelled by 90 grains of FF Goex.

Chokes are Imp/Mod and Skeet #2.

Needs more work to tighten up the wide pattern!

 

[westcoastruss]

Loaded 50 rounds of Marlin 444 - 265 gr FTX over H335
Have 100 223 brass cleaned and ready to start loading 55gr SP over Benchmark

 

[bat119]

50 350 Rem mag with Speer 220 gr. 59.5 IMR 4895
50 9.3x62 270 GR. Speer 58.5 IMR 4895
All ready for some range practise this summer

 

[titch--]

Finally brew the dust off the press from last fall.

I reloaded the last 5 of my 65gr GK's to make room for the 69gr TMK's. I guess I had to blow off the dust on my reloading skillz too because I dropped the powder in then seated the bullet and saw a little pile of powder on my bench. Not thinking I thought some how I missed the case, so I pulled out the hammer thingy to remove the bullet from the case. As I was doing that I noticed that I didnt have a primer in the round that I just made. lol THey have been sitting there for a few months now and just forgot to do the primers. lol No biggie

Loaded up 24.9, 25.2, 25.5, 25.8 26.1 and 26.4grs of varget

The 65's shot good so Im thinking that the 69's should shoot better, I hope.

 

[vagrantviking]

The girlfriend and I put together 25 rounds of all brass 20ga shotgun shells with 7/8oz shot and the same dipper of fffg. 45rounds of 12ga brass with 2 1/2drams of ffg and 1 1/4oz shot.
Finished the weekend by casting a pot of 200gr lee rnfp and loading them over 25gr of fffg in 44sp.

 

[Armored Metal]

The girlfriend and I put together 25 rounds of all brass 20ga shotgun shells with 7/8oz shot and the same dipper of fffg. 45rounds of 12ga brass with 2 1/2drams of ffg and 1 1/4oz shot.
Finished the weekend by casting a pot of 200gr lee rnfp and loading them over 25gr of fffg in 44sp.

What are you shooting those .44sp rounds with?

 

[regulate34]

375ruger
235g TSX
Varget.

.72" and .68" 100yrd groups.
Holds just under 3" at 300yrds

Pretty happy so far.

 

[SURESHOT73]

350 9mm 124gr Campro 4.1gr Win 231
50 22 Hornet 40gr vmax 11gr H110
50 22 Hornet 35gr vmax 12gr H110
50 223 40gr vmax 26.5gr Varget

 

[carlchevalier]

300x .40 s&w 180g zero TC over 4.8g of Clays @ 1.225.