The "What Have You Reloaded Today" thread

Finished up 240 44Russian with Unique and home cast 200gr rnfp.

About 75 44Mag trying some slightly hotter cast loads with 8 and 9 grain charges of titegroup under 240 gr. Lswc.
Going to have to get casting for the other 300 empties. 500 if you add in the 44sp.
 
One liter of 45 ACP (300)

20161125_190834_resized%202_zpsjz9mkvs7.jpg
[/URL][/IMG]
 
Been a couple months since I did any reloading so I dusted off the press and ran up 300rnds of 45ACP using 230gr RN Campros behind 4.5gr TG and CCI primers. Made up an additional 30rnds for my buddy using the same load but with S&B primers. I think the S&B primers are a hair thicker than the CCI and requires more effort to seat them.
 
I annealed 20 cases of .308 and 23 cases of .223 after wet tumbling. I really wanted to try out my new Amp annealer. Then I neck sized the .223 cases, primed, charged, and seated bullets. I know, not a high amount, but I really wanted to try out the annealer. What a piece of kit! I had the .223 cases annealed in 2 minutes.
 
Found a great load for my Jericho 941 in 40S&W. Campro 180 gr. bullet, over 5 grs Power Pistol, with an OAL of 1.135. Using Dominion small rifle primers, they've never let me down. Got about 300 done.
 
done up 50 rds of 303 cast and I might get a chance to do up a bunch of 54 r with cast for target shooting at the range when the weather warms up.
 
Not much today. Twenty rounds of .308 in Lapua brass with 155gr scenars and 47.2gr of Varget for a nice speedy round for my Coyote.
 
Last edited:
Currently on the go.. Making 100 light. 303 British with 125gr plated bullets and 14gr of trailboss nice fun load.. And very easy on the brass
 
20 rds 7.92 x 57 mauser FC brass Hornady 180 SST, IMR 4064 43g. Federal LR primers

30 rds .308WIN R-P brass Hornady 180 SST IMR 4064 42 g Federal 210 primers

Now , just have to find the time/place to test 'em.
 
You must log in or register to reply here.
Back
Top Bottom