Tikka T3

Very misconceived thought! First, T3 will shoot far better than an Axis typically will. T3 is essentially a Sako barrel, so high quality. The rifle is also an excellent platform for mods - like going to a long mag and long bolt stop for short action rounds. For handloaders, that can be a real advantage. The trigger is very crisp and it's adjustable. Most of the time, no bedding job is required. I've had 3 x T3's and all have shot easily under MOA with my handloads with no bedding needed. Last, Tikka actions are very close to true which other lower price point gun manufacturers can only wish they can achieve. Even higher end North American rifles have poor truing (My M700 was out by 7 thou!!). Yes, it is lower on price point than other rifles and has some short cuts to keep cost down but they are very good quality rifles. They've brought home lots of game for me, it is my 'go to' rifle!
 
Mr. Jeffery said:
its like comparing Husky to Stihl. Go to Crags list and you'll most likely come across a lot more huskies than stihls. That's my observations anyway.

Ive got a T3 varmit in 223. I must have got the lemon. It will not chamber a cartridge in the 65-85 grain range without catching on something deep inside the receiver/chamber... ironically the twist on this rifle is for something around 75 gr.... it will chamber 55's all day long without issue.. that is if you can get them to come out of the magazine properly. Usually the cartridges get pushed up into a standing position as the bolt moves forward. Ive reduced myself to loading one at a time.. and loading 75gr. cartridges is a real PITA -especially when the rifle is sitting on the vise all zero'ed in. ~sigh~

Why would anyone put a plastic magazine on a rifle action that is mostly Stainless.... ???

Anyone have an idea as to why this wonderfully accurate gun would jam on the prescribed ammunition?
Click to expand...

Try a long or medium action bolt stop and mag to match...
 
Gunneegoogoo said:
So do my T3's.

If I have a Jeffries, I wouldn't even to talking with peasants like us...... is that your SxS in your avatar??
Click to expand...


please consider who it is you are inferring are peasants. and fyi its "Jeffery" not "Jefferies" get it straight. Thanks

Peasant or not... I am here. Jeffery owner or not, I am still here.

I have no issue with ether Tikka or Savage. Both shoot well. But what grind me the wrong way is the fact that the tikka I possess will not chamber properly nor will it feed. So.. amoungst all the "quality" Do I have a lemon?

I have a winchester SXP. It is the frst and LAST Winny I will ever own. Take that any way you like but those of you who are savy will understand completely what it is that I mean... sort of like telling a woman youre about to break up with... " I dont deserve a woman like you in my life...." (psycho biat....) She will most likely respond: "damn rights you dont!!" but in reality... its meant in a completely different manner....

Ltbull01 said:
Try a long or medium action bolt stop and mag to match...
Click to expand...

Thanks. where to start Looking? I need a solution... thanks for the suggestion.
 
Last edited:
I dunno, do you?? I've had 3 and they all feed fine. What model and caliber??

Pardon my misuse of the proper name of your gun.

Never did tell me, is that SxS yours?? Looks bloody nice, regardless of spelling.
 
T3 varmint heavy bbl. + savage 10FCP both shoot incredibly well. 300m for tikka is like shooting a 22 @ 25 yds. rarely outside of the 10 ring.

No, not mine. just dreaming about it being mine. I am however a Jeffery and It makes me feel pretty good knowing that there exist within my family name.. someone who got it right.
no 404's yet.. maybe one day.
 
Get the CTR with the TRG mags. Well constructed, solidly build 10 rnd mags. Don't talk about price :).
Eagleye said:
The Tikka T3 is definitely a step down from earlier Tikka models.
That being said, your chances of getting an accurate T3 are quite favorable.

I am definitely not a fan of the T3, but acknowledge it's good points. [accuracy, smooth action, etc.]

The stocks are poorly designed for chamberings that deliver a fair bit of recoil, and the plastic magazine leaves
me cold. [they are tough, but expensive and just feel "cheap"]

Plastic bolt shroud is a piece of crap. Trigger guard likewise.

I appreciate many really like them, and more power to the ones that do. I will not be buying any T3's again.
Two was enough for me. [one of these, a 338, was not particularly accurate, BTW.]

Of course, this is my take, YMMV. Regards, Dave.
Click to expand...
 
jdmoores said:
I know this will more than likely upset a few fans... but, I feel like the t3 is the European savage axis. Am I the only one who feels this way ?
Click to expand...

How many Tikkas have you had and if none why slag them ?
My Tikka experiences began with the 55/65 series and continues on with several T3s.
I think they were and still are a fine rifle and will shoot as well or better than many of the other brands in my safes.
Aside from the use of plastic parts quality of workmanship is still excellent as is consistent accuracy.
For instance, I use my T3 223 for testing loads to use in my F-class 40X BR, if a load shoots sub- 1/4 MOA in the T3 which frequently happens, then it's worth a go in the Rem.
Just my thoughts, I think the T3 are excellent..
 
Loved the Tikka i owned but if they could make a short action and bring in a .22Hornet i would be in heaven. Further more they should bring in a nice rimfire. Those would be winners!!
 
^ accuracy aside on the other end of the spectrum; if you want a mountain rifle in a magnum chambering you are going to have to fork out a lot of money for anything that isn't a t3 lite and there is no guarantee the more expensive rifles will be more accurate, lighter or have a smoother action.

Tikka just carries so well; it is the perfect "carry a lot, shoot a little" magnum rifle. The balance and stock shape of the axis are a joke. With irons and I assume a low mounted scope the tikka shoulders and swings like a shotgun; no matter how ugly it is.

Not to mention the battue model and the variety of chamberings; lets see savage do that.
 
Mr. Jeffery said:
its like comparing Husky to Stihl. Go to Crags list and you'll most likely come across a lot more huskies than stihls. That's my observations anyway.

Ive got a T3 varmit in 223. I must have got the lemon. It will not chamber a cartridge in the 65-85 grain range without catching on something deep inside the receiver/chamber... ironically the twist on this rifle is for something around 75 gr.... it will chamber 55's all day long without issue.. that is if you can get them to come out of the magazine properly. Usually the cartridges get pushed up into a standing position as the bolt moves forward. Ive reduced myself to loading one at a time.. and loading 75gr. cartridges is a real PITA -especially when the rifle is sitting on the vise all zero'ed in. ~sigh~

Why would anyone put a plastic magazine on a rifle action that is mostly Stainless.... ???

Anyone have an idea as to why this wonderfully accurate gun would jam on the prescribed ammunition?
Click to expand...

Check to see if the follower in the magazine is upside down.

I ran across a fellow who was having issues with his T3 feeding from the magazine and the follower being upside down was the culprit.
 
Why is the mag plastic?? Dunno. You're right, it's dumb. Lighter?? Yes. Cheaper to make?? Yes. Cheaper to buy?? Absolutely not.

Why WAS the bolt shroud a plastic POS?? Dunno.

Is it a great rifle for 7-1100$?? Damn rights.

Are you hand loading?? If so, what caliber?? What initials does your mag have on it??
 
Gunneegoogoo said:
Why is the mag plastic?? Dunno. You're right, it's dumb. Lighter?? Yes. Cheaper to make?? Yes. Cheaper to buy?? Absolutely not.

Why WAS the bolt shroud a plastic POS?? Dunno.

Is it a great rifle for 7-1100$?? Damn rights.

Are you hand loading?? If so, what caliber?? What initials does your mag have on it??
Click to expand...

.........have you looked at the price difference between the regular plastic T3 magazines and the Tikka CTR (Sako TRG magazines)?

Plastic T3 mag= $91.95
Metal CTR (Sako TRG) mag = $309.99


I don't really understand why people complain about things like a plastic mag (which I've never heard of anyone ever breaking) considering that Magpul Pmags are considered great for AR15s.
 
TRG mags are nice. To avoid buying expensive mags just buy more rifles using the same mag (ie, TRG in 308, 260; CTR in 260)
 
You must log in or register to reply here.
Back
Top Bottom