Universal m1 30 carbine

[the spank]

Just an update here, I did some measuring. I really don't know why they would have added an extension to this thing. With the action closed, I put a cleaning rod down the barrel up against the bolt, marking the end of the barrel with extension on. I then measured from the end of the muzzle to where the rifling starts. This gives me a total of 19" of original barrel.

[/URL
[URL="http://s10.photobucket.com/user/gunsdora/media/Barrel/IMG_3129%20-%20Copy%20-%20Copy_zpskbg8aqel.jpg.html"]

So the OP measures and posts the original barrel length and you post this and tell him it's restricted?

I can only be certain of two things based on the information presented.

1: You are able to read
2: You lack comprehension skills

 

[Hitzy]

Gen 3, worst of the bunch....try and sell it if you can.

 

[pmatuk]

also have a gen 3 that had a chunk of barrel added ,sweated off and still at 19inches .I think that it was a fear back in the day

 

[220]

The original way to go to non restricted was to have a gun smith permantly add an extension that onceas non removable, the his was
Approved method by federal law!

 

[cantom]

The original way to go to non restricted was to have a gun smith permantly add an extension that onceas non removable, the his was
Approved method by federal law!

It worked long ago but then they decided not to accept it anymore.
It has to be a true 19" barrel.