VZhukov 58 project (the blackest NR vz58 ever)
- Thread starter vince514
- Start date
might be a very little bit shorter because i cutted a part from the original stock.
Mine was the S-Stock not the Yugo one.. i had to do a suggery.
I cutted a part of the black that is supposed to go inside the "ak47". so i dont think it has affected the lenght.
forgot to mention.. i dont know if you read the whole thread but i made my own adapter.
Didnt used the RS regulate one. hope it helps.
Mine was the S-Stock not the Yugo one.. i had to do a suggery.
I cutted a part of the black that is supposed to go inside the "ak47". so i dont think it has affected the lenght.
forgot to mention.. i dont know if you read the whole thread but i made my own adapter.
Didnt used the RS regulate one. hope it helps.
i had to cut the angled block, which was about 1" in lenght(goes inside ak47 usually).
what is JB welding?
and for the grip or the plate adapter that i made for my zhukov s-stock?
I took an ar15 stock adapter plate for the vz58 and i modified it using weld, glue, screws and pins on the zhukov to get in on my vz58 before the RS adaptor got released.
Sorry Vince. He's asking about stock, I am asking about pistol grip. 
JB weld is this https://www.amazon.ca/gp/product/B007PP26RI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
i am planning to use this on Zhukov handguard between clamps and heatshield.
So I was thinking to use it to attach the pistol grip too. And was asking if you used magpul bolt included with MOE grip to attach it to receiver.
JB weld is this https://www.amazon.ca/gp/product/B007PP26RI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
i am planning to use this on Zhukov handguard between clamps and heatshield.
So I was thinking to use it to attach the pistol grip too. And was asking if you used magpul bolt included with MOE grip to attach it to receiver.
Sorry Vince. He's asking about stock, I am asking about pistol grip.
JB weld is this https://www.amazon.ca/gp/product/B007PP26RI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
i am planning to use this on Zhukov handguard between clamps and heatshield.
So I was thinking to use it to attach the pistol grip too. And was asking if you used magpul bolt included with MOE grip to attach it to receiver.
that glues looking good. I didnt installed a zhukov handguard on my vz58 cant tell.. but i seen other doing some surgery to install it. JB weld should help.
If i remember correctly yes i could use the bolt provided with the magpul pistol grip.
New part : vz58 dforce quad rail from zahal.
last upgrade in progress at the moment with my gunsmith.
Will have a extended gas tube like ak47(original vz58 gas tube still remain unmodified)
ak47 sight, fixed the same way the original vz58 sights used to be with pin grooves machined on the barrel surface (2 tapper pins to retain sights fixed rock solid in place)
No more silly long barrel look.
Last upgrade will be railed dust cover
last upgrade in progress at the moment with my gunsmith.
Will have a extended gas tube like ak47(original vz58 gas tube still remain unmodified)
ak47 sight, fixed the same way the original vz58 sights used to be with pin grooves machined on the barrel surface (2 tapper pins to retain sights fixed rock solid in place)
No more silly long barrel look.
Last upgrade will be railed dust cover
thats exactly what im doing, going for the non restricted ak look + modernizing the vz58 at the same time.
what red dot/optic would you guy put on a build like mine?
I ve been thinking about russian kobra sight. but i dont know much bout em.
Other alternative would be c-more sight.
what red dot/optic would you guy put on a build like mine?
I ve been thinking about russian kobra sight. but i dont know much bout em.
Other alternative would be c-more sight.
Last edited:
- Location
- Leduc County, Alberta
Covering it in cheese graters ruin the nice lines....
But, like, that's my opinion, man.
But, like, that's my opinion, man.
the new tube is only cosmetic. I would not have changed anything if it was the 15 " R. barrel. I had a serious problem with the long barrel.
The original gas block still the same way it used to be. I did considered replacing the gas block but i didnt wanted to play with the reliability.
The AK front sight is little bit higher. i need to put the rear sight approx 400 m to get a nice sight picture. but i think the front sight can come down a little bit more.
Nope i didnt shot it yet, she left the gunsmith workbench yesterday.
The original gas block still the same way it used to be. I did considered replacing the gas block but i didnt wanted to play with the reliability.
The AK front sight is little bit higher. i need to put the rear sight approx 400 m to get a nice sight picture. but i think the front sight can come down a little bit more.
Nope i didnt shot it yet, she left the gunsmith workbench yesterday.
Last edited:
Lol you made me laugh with the cheese grater. too much rails i guess
I like my new tactical cheese grater though!
