Who has the coolest SKS. Post pics.
- Thread starter Nelson84
- Start date
Any reason to post a pic.
I really like this one- I am thinking that there is a sound reason for having your SKS match your riding mower, but I'm probably thinking too hard about it. I reckon roving bands of wolves make mowing the lawn hazardous, hence the add-on SKS. OR, this picture was actually taken in Helmand province, in which case.....
Any reason to post a pic.
Dammit! I was trying to convince myself that my tractor wasn't getting a scabbard. That's out the Window now
The only place it has 2 serials which are identical are under the gas tube, one printed and one electropenciled. As for the Mag, on the bottom of the mag(From the inside) it has an L shaped metal glued/soldered to prevent the mag arm loading more than 5 rds.
mine is a metal cylinder shaped piece that looks like its been riveted through the bottom of the mag , and the entire gun has all of the original numbers and a whole set of electropencil'd numbers ( except for the barrel which is only electro pencil) the barrel has a different color then the rest of the receiver which makes me think it was replaced in the factory :|, so much for buying a "new unfired ,unissued" yugo sks. im not gonna return it since they dont have any more and im gonna shoot it so at least i have a new barrel
, and the entire gun has all of the original numbers and a whole set of electropencil'd numbers ( except for the barrel which is only electro pencil) the barrel has a different color then the rest of the receiver which makes me think it was replaced in the factory :|, so much for buying a "new unfired ,unissued" yugo sks. im not gonna return it since they dont have any more and im gonna shoot it so at least i have a new barrel 
Any reason to post a pic.
We have a winner!
Any reason to post a pic.
Tactical assault tractor ?
The pins are flared on either end, that's why they're ground flush with the handguard ferrule. Find center and center punch, drill it out with a 3/32" bit then it will easily drift out. I use a short piece of 3/32 welding rod staked in place as a replacement once the handguard has been swapped.
This is my first gun custom job, so I'm pretty happy with this little project. Took it out for it's first post-transplant burn yesterday, worked flawlessly. The Tapco mags don't feed the first round perfectly smoothly, but I'm still pretty happy with them. Hopefully they will loosen up a bit with use.
You'll notice the wood on the gas tube... I bent two punches trying to get the pin out, gotta figure something else out.
SKS: $169
Strikeforce Stock: $119
Tapco Mag: $35
Barska mount: $29
Barska red dot: $49
UTG foregrip: $19
5 hours of filing and dremeling? Free
Total cost: $420 - love it
This is my first gun custom job, so I'm pretty happy with this little project. Took it out for it's first post-transplant burn yesterday, worked flawlessly. The Tapco mags don't feed the first round perfectly smoothly, but I'm still pretty happy with them. Hopefully they will loosen up a bit with use.
You'll notice the wood on the gas tube... I bent two punches trying to get the pin out, gotta figure something else out.
SKS: $169
Strikeforce Stock: $119
Tapco Mag: $35
Barska mount: $29
Barska red dot: $49
UTG foregrip: $19
5 hours of filing and dremeling? Free
Total cost: $420 - love it
BAFH works fine.
15 seconds max.
I know
Last edited:
