Wk180-c 7.62x39

[xdmer]

I'm thinking that .277 wolverine is a better option than 300 Black out. I'm considering custom barrels on other platforms. Easy on the budget and extremely close to 6.8 performance, downside is having to hand load, but if look at 300 blackout, I think most up here are doing that anyway.

agreed 100 % or at least offer 300 black as an option in the future please.

 

[P0WERWAGON]

this is a plinker. making it in an obscure caliber defeats the purpose.

 

[xdmer]

And 300 black out up here isn't? .277 is taking off faster than 300 black out did, and it's cheaper to load. *shrugs* to each their own.

this is a plinker. making it in an obscure caliber defeats the purpose.

 

[Donrozon]

Any direction made by wolverine by now ? Eta

 

[IvoB]

I will be happy with my .223/5/56 WK180c looking forward to buying my first 1k rounds of ammo.

ivo

 

[Mark-II]

And 300 black out up here isn't? .277 is taking off faster than 300 black out did, and it's cheaper to load. *shrugs* to each their own.

If there are cheap bullets available, I'll try anything once.

Hornady bulk fmj, Campro, Russian pull downs - hard to beat those for economy without huffing lead fumes

 

[xdmer]

There is a very wide selection of bullet designs and weights in this caliber 70 to 130 in 1/11 twist, but they do cost - not like super cheap FMJ bulk projectiles. The cheapest I've been able to find for plinking are Remington 115gn roughly 28$ per 100 currently. More selection down south then up here, but still very good options for match target and hunting.

If there are cheap bullets available, I'll try anything once.

Hornady bulk fmj, Campro, Russian pull downs - hard to beat those for economy without huffing lead fumes

 

[specialized7]

.308?

 

[Mr Wolverine]

.308?

On the drawing board!

 

[specialized7]

On the drawing board!

That Would be a really logical cartridge for me as I could hunt with it in sask. I would pretty much unload everything I needed to to preorder that right now.

 

[xdmer]

This will bring a big win, on top of an already big win.

On the drawing board!

 

[gallen270]

Do both. Eventually offer a conversion upper, and a dedicated AK mag lower complete rifle.

 

[Sveinn84]

On the drawing board!

I would be all over a .308 variant if Wolverine was involved.

 

[Mark-II]

If you can make a .308 that doesn't cost what an AR-10 of any stripe does, you'll be getting a visit from the Feds due to your operation of a money making machine.

 

[Tvw]

Please.. Just produce a 7.62 variant.

 

[Wolverine .303]

If you can make a .308 that doesn't cost what an AR-10 of any stripe does, you'll be getting a visit from the Feds due to your operation of a money making machine.

Who told you about our machine!?!?!?

I kid of course, like Mr. Wolverine has said, its on the board, and we are working on it..

 

[jiffx2781]

So have you chosen which configuration you will be making the 7.62x39 version in?

 

[Mr Wolverine]

So have you chosen which configuration you will be making the 7.62x39 version in?

Initially the plan is to use the standard lower with STANAG type mags. so we can offer a complete rifle in 7.62x39, I think we will also offer a 7.62 x 39 top half conversion kit. We have a lower designed to accept AK mags that will be available at a later date. At least that is how I am thinking right now, but to early to take this as "gospel" details may change.

 

[taran1]

.308 would be so sweeeeet!!

 

[driller212]

Any ballpark idea of what the 7.62x39 conversion might cost a fella? Just trying to plan ahead.