** Your NEA102 build **

[DaveMachine]

Can someone post a picture of their BCL 102 showing how far the stock gas tube protrudes into the upper receiver?

Edit: On an unrelated sidenote - here is the best representation of CGN users asking Ryan about the next pre-order of 102s:

 

[iloveak47]

As anyone tried other ar10 uppers to see if they fit?

 

[driller212]

As anyone tried other ar10 uppers to see if they fit?

No AR-10 uppers fit on this lower. God this should be pinned to the top of every thread...

 

[iloveak47]

this should be pinned to the top of every thread...

Yes it should.

Thanks for the answer!

 

[Shooter1971]

Can anyone comment on these? Looking for options for my bcl to stay in 6.5 but lighten her up

http://www.irunguns.com/product.2a-bbl-20-65-creed-lightweight-blk

Ill drop 2# just by switching from my BA 6.5 bbl. I listed it, but damn it is so accurate makes me want to keep it and buy another upper if/when they come up for sale​

 

[Leg]

I think Faxon makes them for them.

 

[R711]

So, since I'm unwilling to read 144+pages. Has anyone tried a KAC rail on this rifle? Also what about a fixed stock, ultimately ending up with a quasi SR-25 looking rifle?
Regards

 

[Dr. Hunter]

I think some people have used a fixed stock with slight modification to the buffer tube. Don't think anyone has tried a kac rail.

 

[CODFan]

Also what about a fixed stock, ultimately ending up with a quasi SR-25 looking rifle?

Changed to a Rifle length Buffer Tube with a Fixed stock ..... for the rail it will require an Armalite threaded Barrel Nut.

 

[Canadian eh!]

Changed to a Rifle length Buffer Tube with a Fixed stock ..... for the rail it will require an Armalite threaded Barrel Nut.

So much like!!!!!!!

 

[R711]

Waiting with bated breath!

 

[trigger'06]

Changed to a Rifle length Buffer Tube with a Fixed stock ..... for the rail it will require an Armalite threaded Barrel Nut.

Have you found the rifle buffer and adjustable gas block to be beneficial? Is that an original bolt carrier?

 

[CODFan]

Have you found the rifle buffer and adjustable gas block to be beneficial? Is that an original bolt carrier?

IMO .... the only required mod was the adjustable gas block. It was needed to resolve the over gassing of the system in its OEM configuration.

The other mod was to move to a low mass JP Bolt carrier and Silent Capture Buffer system. Not mandatory - just preference.

 

[mikethebike]

IMO .... the only required mod was the adjustable gas block. It was needed to resolve the over gassing of the system in its OEM configuration.

The other mod was to move to a low mass JP Bolt carrier and Silent Capture Buffer system. Not mandatory - just preference.

which adjustable gas block did you get?

 

[CODFan]

which adjustable gas block did you get?

http://slrrifleworks.com/index.php?route=product/product&path=57_125_169&product_id=915

However - my new barrel arrives Monday ... lightweight 18.5" .308 with Rifle length gas system .... requires .750 gas block

 

[Pax+Caritas]

Will you be parting with the SLR .875 gas block?

http://slrrifleworks.com/index.php?route=product/product&path=57_125_169&product_id=915

However - my new barrel arrives Monday ... lightweight 18.5" .308 with Rifle length gas system .... requires .750 gas block

 

[trigger'06]

which adjustable gas block did you get?

Sweet, tracking says my SLR handguard and adjustable gas block are now in Vancouver.I will be ready when my GenII OD Green arrives.

Seriously considering rifle lenth and JP low mass for " stage II ", depends on how I like the rifle.

Before rebarreling I'm going to see how it shoots and make sure nothing else changed.

 

[xeelee]

However - my new barrel arrives Monday ... lightweight 18.5" .308 with Rifle length gas system .... requires .750 gas block

Did you buy the Fulton Armory 18.5" Cl barrel?

 

[CODFan]

Did you buy the Fulton Armory 18.5" Cl barrel?

Yup

 

[xeelee]

Nice! I've been looking at that very barrel myself...did you order driectly from Fulton Armory or is there a Canadian vendor that carries their products?