GSG Schmeisser STG 44 in 22LR Non-Restricted

The box is definitely not collectable lol

stg44-1_zpshtyrset0.jpg



stg44-2_zpsf6ed0zbk.jpg



stg44-3_zpsei1b3fnf.jpg



stg44-4_zpssu29kjoi.jpg


stg44-6_zpsmhhsz1ol.jpg



stg44-5_zpsdxlczlb2.jpg
 
Last edited:
Already i can see it has way too many screws its just another keltec to me

FFS you haven't even held one and you have it all figured out. There are two screws in the body of this gun btw. Two. Four if you include the ones holding the pistol grip panels on. The 6 screws in the mag are no different than any other 22LR mag out there for ARs or ISSC guns etc.

For those that have held one... and those that are actually interested in holding this gun... there is a Blueline "import" marker on the right side of the gun. I call it an import mark as Blueline is the importer, and they have there brand name laser etched on the right side of the gun, much like ATI did in the US. Not as many markings as ATI, or as big, but it is still there.

This is a solid gun. Hefty, but feels much like an original which is after all the whole point of this gun. You want light, get a 10/22. You want something that feels like the real thing when you hold it, this is it.
 
Dumb questions, I closed the dust cover over the ejection port, how the heck do I open the flap again lol. I pulled the cocking lever back and it doesn't do anything
 
Dumb questions, I closed the dust cover over the ejection port, how the heck do I open the flap again lol. I pulled the cocking lever back and it doesn't do anything

If you have a mag in, and pull the cocking lever back it will keep the bolt to the rear, even if you put the charging handle forward. Remove the mag, pull the charging handle back and it will pick up the bolt and release it the next time the handle goes forward. It should engage the door at that point.

The mag will keep the bolt hold open regardless of the position of the charging handle.
 
Opens up when I press it with my finger...

Just to confirm, when I pull the cocking lever back with a magazine in and release it forward, the dust cover should be opening up automatically correct?


edit: I'm using an empty magazine right now, does there need to be a dummy round for the dust cover to open up?
 
Take the magazine out. Try it then.

If the bolt is locked back, and you have a magazine in the dust cover will stay closed as the bolt will stay in the open position regardless of the charging handle position.

If you take the mag out, the charging handle should pick up the bolt and move it once you release the handle.
 
Nope...not working...the bolt stays open. Chamber appears to be stuck in open position?

edit: okay got it to work now, for some reason, chamber was stuck in open before. Finally got it loosened and to close. Not sure why it was stuck
 
Last edited:
Back
Top Bottom