Condition 2 has led to a ton of ND's in Afghanistan. Guys try to lower the hammer and slip or otherwise release it and it fires. Hence CAF policy that the pistol be carried in condition 3.
Not surprising in the slightest.
Condition 2 has led to a ton of ND's in Afghanistan. Guys try to lower the hammer and slip or otherwise release it and it fires. Hence CAF policy that the pistol be carried in condition 3.
Not surprising in the slightest.
I was going to say the same thing.
We actually have a license to produce the Inglis Hi-Power. Just have Colt Canada produce new Hi-Powers, with upgraded 3-dot sights and leave out the magazine disconnect. This would require zero changes, unlike adopting something new.
You can't fix what ain't broke.
Not if the hammer is cocked, like a pre-Series 80 1911. As long as it is not carried Condition 2, it will not drop fire.
Most of the US military still carries a Beretta 92. USSF carries either a 92 or a Glock (they are given a choice). Marsoc are the only ones who routinely carry 1911s and I once met a SEAL in Afghanistan with an old school 1911 and an old school M14 and a thumper on his back. He was retro as hell.
The Colt Series 80 has a firing pin safety block.
Condition 2 has led to a ton of ND's in Afghanistan. Guys try to lower the hammer and slip or otherwise release it and it fires. Hence CAF policy that the pistol be carried in condition 3.
The only pistols allowed to be carried in condition 2 are the ones equipped with a mechanical de-cocker (the 225 and 226). Hell, in Kandahar they wouldn't even let guys keep a mag in their pistol in camp. It had to be carried fully unloaded (Unless you had a card saying you were CPP or you were SOF).
The Cdn Forces could have spent 10 minutes watching an ISPC or IDPA match to learn how to safely lower a hammer onto a loaded chamber. It happens virtually every week-end at thousands of matches across North American by shooters playing IDPA, IPSC and ISPSA. I have never witnessed a AD/ND using the thumb roll method to lower a hammer on a loaded chamber. Hell their are videos on the subject. If Cdn soldiers were experiencing ND's either at home or abroad while lowering hammers on their Hi-Powers than their is something seriously wrong with their training or training methods. No other way to describe it.
Take Care
Bob
I had a soldier come to me oversea's and ask me "How do I get the bolt out of my handgun" I asked this person have they ever shot the BHP and they replied "once on work up training". Is this acceptable? absolutely not, but it's the card many in the CAF are dealt. We need a pistol that is easy to use and as safe as possible for someone with little to no training.
Overall the Hi-Power is not a bad pistol. Yes it is a bit outdated but is it really worth upgrading to something slightly better?
This is the reason they have stayed in service so long is because we barely use pistols to begin with, and its not like the modern designs are much better (its not like the difference between a Webley Revolver and a Browning Hi-Power). So what modern designs are slightly lighter, slightly easier to disassemble, and have slightly larger magazine capacities.
Parts are definitely running out, but it almost isn't even worth the money and effort to replace them. At the moment it is pick and choose what we need, and a pistol replacement I think should be at the bottom of the list after all the bigger things which the CF needs.
Just a short list of critical kit the CF is lacking...
-Self Propelled Arty
-Good anti-tank system
-Anti-Air Systems
-Combat Ships, even our newest 'fresh out of refit' ships are already showing there age, when the design was only meant for 25 years and it has already reached that point, it isn't a good time to call it a mid life refit
-Resupply Ships, its embarrassing for us to be relying on Chile for resupply
-Fighter Aircraft, those CF-18s are getting up there
-'B' class vehicle fleet (aka all those trucks that supply the CF in war, without supply you might as well not even bother showing up)
-Boots
I could keep going but in any case you can see why I would consider a pistol replacement to be pretty low on the needs category. The odds of lack of a pistol being the reason you died in a modern battlefield is exceptionally low, lack of those other things I listed is much higher up on the reasons you would die.
Hey Fellas. Listen, I never served, am not a "high speed/ low drag" type or an "operator"... I'm just a lifelong redneck firearms enthusiast... and I just don't know why COLT Canada has a monopoly on firearms issued to the CF?
I understand, I think, that the intent is to have secure domestic production... but why Colt Canada, and not Glock Canada, or Sig Canada etc...?
As always, I enjoy the informative threads and unsubscribe from the ones infested with the keyboard warriors...
I L-O-V-E hearing from ACTUAL men who have served and who know.
I had a soldier come to me oversea's and ask me "How do I get the bolt out of my handgun" I asked this person have they ever shot the BHP and they replied "once on work up training". Is this acceptable? absolutely not, but it's the card many in the CAF are dealt. We need a pistol that is easy to use and as safe as possible for someone with little to no training.
Fact: in Afghanistan, most people issued a bhp didnt know how to use it, strip&clean it, let alone shoot it and got it issued so they didnt have to carry a "heavy rifle" when shopping around on the boardwalk complaining about timmies not having their favorite donut this morning.
![]()



























