I thought BV's target pic was about right for this type of rifle. Just curious BV, did you adjust the front site as you went?
No, I just fired 100 rounds to get a realistic group. Forgot to take front sight tool.
HAAA! HA haaaaa he makes funny joke. lol.Fixed ou bending ?
These rifles are bullet hoses.
HAAA! HA haaaaa he makes funny joke. lol
Oh I like it.![]()
Mine is nice and straight (less that 0.030 difference from one side to the other, at the end off the barrel sleeve and only 0.004 at the last point on the barrel before the front sight/gas block).
So....., I spent a little time and gave my new T81 Folder a Face-Lift...
1) Removed wood.
2) Stripped with Circa 1850 gel stripper, light sanding.
3) Stained 3 times with Min-wax, Dark Mahogany.
4) Applied 5 coats of BC Tru-Oil ,fine steel wool rub down after each coat.
I Really like how she looks now (the camera makes the stain look lighter than in real life)
![]()
How she looks Now...
![]()
As delivered a couple of days ago...
Thanks Fellas!
I also trimmed (and Blued) the rear sight cross bar (as others have done) - MUCH better view, in my opinion.
![]()
That looks real good!![]()
How she looks Now...
All that's left is to find some free time so you can come out to my place and help me ruin my steel plates
I'll weld some chain to the back of a couple more I have laying around so we have more to shoot at.
Mine is nice and straight (less that 0.030 difference from one side to the other, at the end off the barrel sleeve and only 0.004 at the last point on the barrel before the front sight/gas block).
So....., I spent a little time and gave my new T81 Folder a Face-Lift...
1) Removed wood.
2) Stripped with Circa 1850 gel stripper, light sanding.
3) Stained 3 times with Min-wax, Dark Mahogany.
4) Applied 5 coats of BC Tru-Oil ,fine steel wool rub down after each coat.
I Really like how she looks now (the camera makes the stain look lighter than in real life)
![]()
How she looks Now...
Great jobMine is nice and straight (less that 0.030 difference from one side to the other, at the end off the barrel sleeve and only 0.004 at the last point on the barrel before the front sight/gas block).
So....., I spent a little time and gave my new T81 Folder a Face-Lift...
1) Removed wood.
2) Stripped with Circa 1850 gel stripper, light sanding.
3) Stained 3 times with Min-wax, Dark Mahogany.
4) Applied 5 coats of BC Tru-Oil ,fine steel wool rub down after each coat.
I Really like how she looks now (the camera makes the stain look lighter than in real life)
![]()
How she looks Now...
![]()
As delivered a couple of days ago...