** Your NEA102 build **
- Thread starter vancouverbc
- Start date
- Location
- Red Deer, Alberta
I'm running a HST on my AR-10 with high ARMS rings. Perfect height, for clearance. Here is a picture of it on my 102.
Weird the Gen 1 rifle looks like it doesn’t have the ‘bonus feature’ of a self opening port door.
Weird the Gen 1 rifle looks like it doesn’t have the ‘bonus feature’ of a self opening port door.
You mean a "semi-automatic self-opening port door"
Hey, looking at the 'ears' of a google image of that model, you may have to shave them. I had to shave PARTS OF the ears off my VLTOR/BCM gunfighter handle to go it the 102.
this is the image i looked at:
https://cdn3.volusion.com/vrfwc.byruj/v/vspfiles/photos/RAPTOR-2.jpg?1509625836
The ears on the stock 102 charge handle are somewhat smaller:
This is my VLTOR/BCM charge handle before shaving parts of the ears off:
Last edited:
Canada Ammo has them on sale was thinking of getting one but not sure about how easy or hard to modify it to work.
It's VERY easy if you dont care about looks/finish. It's harder if you want to keep the charge handle, um, nice looking
A rotary dremel should fix things in 5-10min MAX. Of note, the material I removed from said ears was the part that is closest to the actual handle.
Last edited:
There is a change from the “Gen 1”
sigh ugh which one is it?
The picture is a gen 1, the top left graphic is gen 2.
Below picture should clarify
DiabeticKripple
CGN Regular
- Location
- Red Deer, Alberta
The one on the left.
The picture is a gen 1, the top left graphic is gen 2.
Below picture should clarify
ok so how can I buy that somewhere?
DiabeticKripple
CGN Regular
- Location
- Red Deer, Alberta
Here’s the difference between the stock charging handle and a Radian Raptor. I had to file the Raptor to fit.
Hey, looking at the 'ears' of a google image of that model, you may have to shave them. I had to shave PARTS OF the ears off my VLTOR/BCM gunfighter handle to go it the 102.
this is the image i looked at:
https://cdn3.volusion.com/vrfwc.byruj/v/vspfiles/photos/RAPTOR-2.jpg?1509625836
The ears on the stock 102 charge handle are somewhat smaller:
This is my VLTOR/BCM charge handle before shaving parts of the ears off:
do you have a picture of it after you shaved them down?
Uh, I couldnt find my dremel or a file.. I used a drill with a metal bit and just ran the handle perpendicular to the bit's axis of rotation. It gave a very messy, albeit working, result.
If I put a picture up, you will all yell out blasphemy!
DiabeticKripple
CGN Regular
- Location
- Red Deer, Alberta
I filed mine and it’s still a bit messy. I don’t have a dreamer.
you were warned
Also, playing around with the stock handle and the BCM... that stocker is a pita to operate with its rough edges...
DiabeticKripple
CGN Regular
- Location
- Red Deer, Alberta
Mines not that ugly lol.
