Dominion Powders Now Available

[6MT]

.....

 

[trapoholic]

Any 4064 left kickin around?

 

[Sakonut]

Looking for a stock for a Musgrave Springbok Centurian.
Please contact me.
Thank you!

A real rocket scientist, I see

 

[Sun_and_Steel_77]

***

 

[todbartell]

105 gr bullet?

yeah 105gr Nosler RDF


here's an 8208 comparison

6.5 Grendel, 20.0" Howa Mini 1:8t
120gr Nosler BT
Starline brass / CCI450 primer
2.27" OAL (.056" jump)
26.0grs powder

IMR 8208 - 2338 fps
D8208BR - 2476 fps

 

[Ruger007]

Should have bought more of the D4064 and D4895.

 

[trapoholic]

Just ordered 2 pounds of the 4895 to try out in the 7400 308. Hopefully it holds up to temperature swings.

 

[turbo_bird]

Just picked up my first 308 and was going to order some 4895 to try, but see it's all gone now. I've still got some 8208, so I guess I'll try that for now. I'm guessing the 4350 I've got will be too slow for it based on what others have posted here. The 8208 has been working pretty good in a 223 with 52gn hollow points.
Kristian

 

[tivatian]

Any chance to get more SR primer back in stock?
Got 10lbs of your new 8208 to try for 223 and 308, still have 4198 and 4064 from you that worked very well for me ..Now, I need more primers to reload more Thanks!

 

[mbogo3]

Large Berdan primers?

 

[Ruger007]

We have D4350 in a few weeks. D7828 due next year

Any chance that the D7828 is still in the works?

 

[CanAm]

Any chance that the D7828 is still in the works?

I haven't heard an eta yet

 

[bdiddlez]

any other comparisons of D4350SSC vs imr 4350

looking for 6.5creed shooting 140grain bullets if I am allowed to be picky

 

[Buckmastr]

any other comparisons of D4350SSC vs imr 4350

looking for 6.5creed shooting 140grain bullets if I am allowed to be picky

D4350sc is too slow for a 6.5 Creedmoor. It’s burn rate is closer to RL19 then imr 4350 in my experience.

 

[bdiddlez]

what about D8208BR in 223?

trying to find some cheaper component alternatives...

 

[jordanlillico]

It(sorry D4350ssc) works fair in the 6.5cm with 147 eld and 145mb it is a compressed load and you will need to load in the 2.9xx coal area
It works great in my 6.5-06 with 145 mb

 

[bdiddlez]

It works fair in the 6.5cm with 147 eld and 145mb it is a compressed load and you will need to load in the 2.9xx coal area
It works great in my 6.5-06 with 145 mb

the D8208BR?

 

[jordanlillico]

D8208br out did my varget load with accercy es sd and was faster with hornady 75gr bthp match
the D8208br is faster burn then imr by a bit
also working with it in a 6br see how it goes

 

[turbo_bird]

Has anyone else found the 4350 to be really dirty? I tried a bit in my 6.5 yesterday, and it was pretty gross on the lower end. The cases were covered with what almost looked like black grease. It seemed like it was all over the place velocity and impact wise with a couple quick ladder tests.
Kristian

 

[MuthaFunk]

Has anyone else found the 4350 to be really dirty? I tried a bit in my 6.5 yesterday, and it was pretty gross on the lower end. The cases were covered with what almost looked like black grease. It seemed like it was all over the place velocity and impact wise with a couple quick ladder tests.
Kristian

I don't have any direct experience with 4350 but I can say it's a slower powder for 6.5 creed and it's bullet weights. It will no doubt benefit from a good crimp or seating the bullet into the lands to build up the pressures.