New SKS Magwell adapters🔥 Made in Ontario by True North Arms

True North Arms Corp

True North Arms Corp

CGN frequent flyer
Business Member
Rating - 99.1%
110   1   1
Location
GTA
New SKS Magwell adapters🔥 Made in Ontario by True North Arms
1753554521230.png

You asked for it, You got it!​

We've taken samples of other SKS magazine adapters and improved them in every way.
These are made from 3D printed polymer and cnc milled components made at our facility in Ontario Canada.
They do not need to be aluminum as they simply hold a magazine in place, there are essentially no forces on them.

The difference between FDM printed and SLS prints is the surface finish and layer line sheer issues.

The FDM looks of layers built up and when the prints fail, they tend to fail in along a seam. The SLS prints have layers all melted together and to look more like an injection molded part.

1753554559375.png

True North Arms SLS Flared SKS Magwell - Price: $159.99 - Link to purchase

1753554647247.png

True North Arms FDM Flared SKS Magwell - Price: $89.99 - Link to purchase​

We have made a whole Youtube video where we show you all the parts, and instructions on how to install them. Be sure to watch it and leave us comments and feedback.
Thank you for shopping at TNA!
-Stanley and the gang

www.truenortharms.ca
 
Undergiver said:
How about a Magwell that accepts AK PMAG's
Click to expand...
They don’t work because the feed lips on the magazine are narrower than the bolt body. I converted one once. You don’t need a mag well just a latch but you need to mill the sides of the bolt. Besides I’m pretty sure the point of ar mag adapters is to be able to use 10 round capacity.
 
True North Arms Corp said:
New SKS Magwell adapters🔥 Made in Ontario by True North Arms
View attachment 986321

You asked for it, You got it!​

We've taken samples of other SKS magazine adapters and improved them in every way.
These are made from 3D printed polymer and cnc milled components made at our facility in Ontario Canada.
They do not need to be aluminum as they simply hold a magazine in place, there are essentially no forces on them.

The difference between FDM printed and SLS prints is the surface finish and layer line sheer issues.

The FDM looks of layers built up and when the prints fail, they tend to fail in along a seam. The SLS prints have layers all melted together and to look more like an injection molded part.

View attachment 986322
True North Arms SLS Flared SKS Magwell - Price: $159.99 - Link to purchase

View attachment 986323

True North Arms FDM Flared SKS Magwell - Price: $89.99 - Link to purchase​

We have made a whole Youtube video where we show you all the parts, and instructions on how to install them. Be sure to watch it and leave us comments and feedback.
Thank you for shopping at TNA!
-Stanley and the gang

www.truenortharms.ca
Click to expand...

Are you offering the modifications to be done at your shop?
 
Glad to see innovation with the SKS. Given its ubiquity in Canada it hasn't benefitted as much as it should have from engineering solutions to bring to the modern era. It's THE semi auto rifle now, one of the only ones left.

I cringe at the thought of any of these kinds of permanent modifications though. I'll wait for something that doesn't require it. Look what we are paying for French ticklers now. These aren't $120 throw away rifles anymore.
 
I'm interested but don't think I'm capable of doing the work to open up the magazine well with hand tools. If this is something I buy I would need to find someone to do the work required.
 
If a rifle has already been modified to use the hical adapter, is there any further modifications needed to use this?

Also, if you were to pull the adapter backwards, would that activate the SKS mag release and cause the adapter to fall off?
 
migrant hunter said:
It looks like the whole adapter can't move backwards once it's installed.
Click to expand...
I thought that was the case with my hical adapter, but its not. holding the magwell when firing would cause the magwell to fall off.
the SKS magazine release is suppose to slid backwards, so unless this magwell pushes the magazine release all the way back, it would probably do the same?
 
You must log in or register to reply here.
Back
Top Bottom