Brand New to Canada: SG-12 "SPAS"

Somerset Bar said:
Nope, nothing. I filled in their form on their webpage. Maybe they just plan to wait until we fix the issues and then "oh hey, everything okay?"
Click to expand...
Ive sent my first one using the form aswell. Now ive just sent another one straight from my email and attached a bunch of pictures and the result of ours digging.

In my case there no doubt the tab is binding to the reciever and i believe the wiggle room it as to do so come from thoses out of spec holes.

Once that bolt release is fix the rest should be a walk in the park. A little bit of blue loctite on the tube extention, bit of torque on the choke, a small wood spacer between the limiting rob and the spring cap and voila. Its should run 100%.
 
I was just looking at the magtube extension cuz some ppl were saying it kept coming loose from recoil and i noticed you could file a small u notch in the tube to allow the detent to come out more and that should lock it in place without messing with locktight
 

Attachments

  • 20260910_222753.jpg
    20260910_222753.jpg
    46.3 KB · Views: 37
Jesus.C said:
Ive sent my first one using the form aswell. Now ive just sent another one straight from my email and attached a bunch of pictures and the result of ours digging.

In my case there no doubt the tab is binding to the reciever and i believe the wiggle room it as to do so come from thoses out of spec holes.

Once that bolt release is fix the rest should be a walk in the park. A little bit of blue loctite on the tube extention, bit of torque on the choke, a small wood spacer between the limiting rob and the spring cap and voila. Its should run 100%.
Click to expand...
What is the "a small wood spacer between the limiting rod and the spring cap" for again? To limit double feeds?
 
CC89 said:
What is the "a small wood spacer between the limiting rod and the spring cap" for again? To limit double feeds?
Click to expand...
To keep the mag spring retaining cup from shooting into the mag tube extension. There is a thin limiter inside the mag tube extension, but it doesn't rest against that plug, a spacer would keep it from popping loose.

My receiver is also getting slight scratches on one side from the stock, I seem to remember similar scratches on pictures of real Spas, as well as wear from the pump on the heat shield, so I kind of accept that as part of the package.

I used high heat loc tite on the choke, I'll never be changing that out and I don't want to lose it.
 
Last edited:
Somerset Bar said:
To keep the mag spring retaining cup from shooting into the mag tube extension. There is a thin limiter inside the mag tube extension, but it doesn't rest against that plug, a spacer would keep it from popping loose.

My receiver is also getting slight scratches on one side from the stock, I seem to remember similar scratches on pictures of real Spas, as well as wear from the pump on the heat shield, so I kind of accept that as part of the package.

I used high heat loc tite on the choke, I'll never be changing that out and I don't want to lose it.
Click to expand...
Yes to similar scratches on receiver sides of the original SPAS 12. And sadly yes…to some of the mechanical issues being seen here. It certainly gives the gun that iconic look to it though …😉
 
Somerset Bar said:
To keep the mag spring retaining cup from shooting into the mag tube extension. There is a thin limiter inside the mag tube extension, but it doesn't rest against that plug, a spacer would keep it from popping loose.

My receiver is also getting slight scratches on one side from the stock, I seem to remember similar scratches on pictures of real Spas, as well as wear from the pump on the heat shield, so I kind of accept that as part of the package.

I used high heat loc tite on the choke, I'll never be changing that out and I don't want to lose it.
Click to expand...
The choke is externally threaded so I might just pop that sucker off and call it a day. :LOL:
 
Got one last night. all the buttons and functions work well dry testing. No issues with anything hard to press. dry cycling is smooth. took it apart no heavy grease but power polished and thoroughly cleaned everything and put in some hopps. Filed off that one corner of the bolt that hits the inside of the receiver and added lock tite in a few spots. I plan to do real testing soon. tried holding with one arm using the hook, works but she a heavy sucker, hahahaha. I found after polishing the slide groves in the heat shield to a nice sheen, the forfend slides nicer
 
instrumentek said:
Got one last night. all the buttons and functions work well dry testing. No issues with anything hard to press. dry cycling is smooth. took it apart no heavy grease but power polished and thoroughly cleaned everything and put in some hopps. Filed off that one corner of the bolt that hits the inside of the receiver and added lock tite in a few spots. I plan to do real testing soon. tried holding with one arm using the hook, works but she a heavy sucker, hahahaha. I found after polishing the slide groves in the heat shield to a nice sheen, the forfend slides nicer
Click to expand...
I think the QC on this gun is the core of the issue. Mine also seemingly avoided all the common issues that has plagued a lot of this production run. I guess only time will tell what issues I'll face, but I'm sorry to see everyone else having such a mixed bag of outcomes. We're starved for exciting options up here and it really feels predatory when a release misses the mark so hard.
 
the_cacciatore_kid said:
I think the QC on this gun is the core of the issue. Mine also seemingly avoided all the common issues that has plagued a lot of this production run. I guess only time will tell what issues I'll face, but I'm sorry to see everyone else having such a mixed bag of outcomes. We're starved for exciting options up here and it really feels predatory when a release misses the mark so hard.
Click to expand...
I'm a TNW suomi survivor. Dealing with semi autos even the Benelli's and bushmaster i had to work on em to get them running smoothly and reliably. This seems on par with all brands i've dealt with to be honest. Some less some more but all require some work in my experience. Maybe one or 2 SKS's of the bunch where flawless.
 
Umpire said:
Was this batch Gen 1 or 2?
Click to expand...

Tactical Imports said:
We were the architects for this entire endeavor. US Distributors work on a net 90, where manufacturers have to front the inventory and then wait for payment. We fronted the full development costs in 2024 and despite all of the hardships with the bans and nearly going under, would not let this thing out until it was right. The original design had a plastic heatshield and different handguard, was hideous. We saw the potential, took that and made it into what it was today. The gen 1 seen above was someone at Sulun deciding to start production before we finalized the design, and we flatly refused to accept for all of the obvious reasons. It should also be noted that our MSRP is significantly lower then those selling in the USA...
Click to expand...

T.I. claims they are generation 2.

The firearm is severely flawed but it still went up for sale because the 250-500% profit margins on this crap is a higher priority then actually solving the root problems.

Quality doesn't matter as long as it sells out instantly then you have your boost in capital so you can do the same thing over and over again.

the_cacciatore_kid said:
I think the QC on this gun is the core of the issue. Mine also seemingly avoided all the common issues that has plagued a lot of this production run. I guess only time will tell what issues I'll face, but I'm sorry to see everyone else having such a mixed bag of outcomes. We're starved for exciting options up here and it really feels predatory when a release misses the mark so hard.
Click to expand...

Businesses preying on the desperate and acting like they are doing everyone a favor in the process really highlights arrogance and greed.

3YvUSeU.gif


I want the market flooded with QUALITY FIREARMS instead of all of this pot metal caveman built bull#### we are expected to be so grateful for while we are in this crappy overall government situation.

If that gets me called a fudd, liberal, polytech supporter/ect oh well I'll wear that badge with pride.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom