338 federal barrel lenght

I want a short action for that one!
That said I need a new 223 and I think I will go the tikka route.
The Tikka is a near perfect action Std lenght and not heavy Buy a USED T3X SS lite rifle in 308 and rebore & re chamber it and shorten to 20 “ There straight stack mags feed very Well ! JMO
 
Why are you insistent on a rebore?
Because it is cheaper than a new barrel and the work that goes with it. Plus supposedly that a gain twist riffling like the Smith’s do does help with velocity a little and since I’m going 20” if I can get same velocity as a 22” it won’t hurt!
Words I got for new barrel plus chambering and installing is north of $1k and that is still in the white so a rebore runs at about $550!
 
Last edited:
Oh 🤷‍♂️ which rifle model did you buy ? Did Smith say why he won’t re bore those rifles ?
Browning Abolt medallion 243.
He said he never had good luck with them.
He seems to really like working with Remingtons. He also said that the savage 99 are good to work with. Oups not savage but cz so sako tikka and cz are the no go ones.
 
Some years ago, an article by John Barsness described his 338 Win Mag - I think at the time he had a SAKO barrel on it - VERY hard metal, Barsness wrote - maybe SAKO still continues to be harder steel? I do not recall Barsness describing "how" he determined the SAKO steel to be harder - one would think about any barrel maker would be similar? I have sawed off several barrels - I am under the impression that "barrel steel" is not "hard steel" - although SAKO might heat treat it to harden it more than others??
 
Last edited:
  • Like
Reactions: DGY
You hear so much about these uber short "truck guns" these days. I'm trying to wrap my head around the ramifications. I mean, given that i've never lived in a jurisdiction where shooting from inside a truck is legal. It's not a space-issue, the trucks these days are anything but short on room - they're so big in fact it's become rolling comedy out there, everyone driving a real-life Tonka Toy, we buy 'em big and then make 'em bigger, even the noise we make bigger. (Another thing i find inexplicable, come to think of it... this big noisy truck fetish - a version of the gorilla beating its chest perhaps?) Heck, the wee Toyota that would have fit inside the cab of a pickup today, the one i had back in the 80's had room behind the seat for any long gun can think of, short perhaps of a punt-gun. I'm assuming the idea is you have to get into action real fast. What's a guy need to get into action so fast for? Zombie road-blocks? Check-stops when you don't feel like the breathilizer? Making a bank-heist get-away? Ventilating road-signs on-the-fly? Why do we need smaller and smaller guns for bigger and bigger trucks?

It's not an intuitive thing the way a saddle-carbine is intuitive.
 
You hear so much about these uber short "truck guns" these days. I'm trying to wrap my head around the ramifications. I mean, given that i've never lived in a jurisdiction where shooting from inside a truck is legal. It's not a space-issue, the trucks these days are anything but short on room - they're so big in fact it's become rolling comedy out there, everyone driving a real-life Tonka Toy, we buy 'em big and then make 'em bigger, even the noise we make bigger. (Another thing i find inexplicable, come to think of it... this big noisy truck fetish - a version of the gorilla beating its chest perhaps?) Heck, the wee Toyota that would have fit inside the cab of a pickup today, the one i had back in the 80's had room behind the seat for any long gun can think of, short perhaps of a punt-gun. I'm assuming the idea is you have to get into action real fast. What's a guy need to get into action so fast for? Zombie road-blocks? Check-stops when you don't feel like the breathilizer? Making a bank-heist get-away? Ventilating road-signs on-the-fly? Why do we need smaller and smaller guns for bigger and bigger trucks?

It's not an intuitive thing the way a saddle-carbine is intuitive.
Well o don’t drive with the gun behind the seat when I hunting mainly getting to and back from hunting area, the rifle is sitting right beside me muzzle down and easy and fast to grab as I exit the vehicle most of the time my old dodge ram 1 ton diesel, the only truck I have, the truck I use for work, to get firewood and to get to and from hunting areas. It’s a crew cab so for sure plenty of room on the back seat but usually full of gear and or people( I rarely hunt alone).
Anyway it won’t be only a truck gun but also pretty useful on the snowmobile or on the mtn bike!!
 
Funny, I've read and heard the the phrase "truck gun" for many years, and at no time did it ever occur to me that it was referring to a gun to be shot from the truck window. I have always assumed that it describes a bit of a beater rifle...but still very capable...that is kept in the truck just in case. It's not expensive, not beautiful, just utilitarian. It needs to be compact so that it takes up less space under or behind the seat. It might have some sentimental value based upon its history with you, but it shouldn't be something you will cry about if it is stolen, burned up, etc.
 
Some years ago, an article by John Barsness described his 338 Win Mag - I think at the time he had a SAKO barrel on it - VERY hard metal, Barsness wrote - maybe SAKO still continues to be harder steel? I do not recall Barsness describing "how" he determined the SAKO steel to be harder - one would think about any barrel maker would be similar? I have sawed off several barrels - I am under the impression that "barrel steel" is not "hard steel" - although SAKO might heat treat it to harden it more than others??
actually a tikka and sako are the same steel and most of the time the same barell with a different stamp.
 
  • Like
Reactions: DGY
Back
Top Bottom