I already have 3 30-06’s….
Yeah the long action would be an option but I’m not looking for a rebarrel but a rebore from Gerard Smith.
Anyway i will find something!!
Why are you insistent on a rebore?
I already have 3 30-06’s….
Yeah the long action would be an option but I’m not looking for a rebarrel but a rebore from Gerard Smith.
Anyway i will find something!!
The Tikka is a near perfect action Std lenght and not heavy Buy a USED T3X SS lite rifle in 308 and rebore & re chamber it and shorten to 20 “ There straight stack mags feed very Well ! JMOI want a short action for that one!
That said I need a new 223 and I think I will go the tikka route.
The rifle is already bought… and Gerard Smith doesn’t do rebore on sako, tikka and savage.The Tikka is a near perfect action Std lenght and not heavy Buy a USED T3X SS lite rifle in 308 and rebore & re chamber it and shorten to 20 “ There straight stack mags feed very Well ! JMO
Because it is cheaper than a new barrel and the work that goes with it. Plus supposedly that a gain twist riffling like the Smith’s do does help with velocity a little and since I’m going 20” if I can get same velocity as a 22” it won’t hurt!Why are you insistent on a rebore?
OhThe rifle is already bought… and Gerard Smith doesn’t do rebore on sako, tikka and savage.
Browning Abolt medallion 243.Ohwhich rifle model did you buy ? Did Smith say why he won’t re bore those rifles ?
Well o don’t drive with the gun behind the seat when I hunting mainly getting to and back from hunting area, the rifle is sitting right beside me muzzle down and easy and fast to grab as I exit the vehicle most of the time my old dodge ram 1 ton diesel, the only truck I have, the truck I use for work, to get firewood and to get to and from hunting areas. It’s a crew cab so for sure plenty of room on the back seat but usually full of gear and or people( I rarely hunt alone).You hear so much about these uber short "truck guns" these days. I'm trying to wrap my head around the ramifications. I mean, given that i've never lived in a jurisdiction where shooting from inside a truck is legal. It's not a space-issue, the trucks these days are anything but short on room - they're so big in fact it's become rolling comedy out there, everyone driving a real-life Tonka Toy, we buy 'em big and then make 'em bigger, even the noise we make bigger. (Another thing i find inexplicable, come to think of it... this big noisy truck fetish - a version of the gorilla beating its chest perhaps?) Heck, the wee Toyota that would have fit inside the cab of a pickup today, the one i had back in the 80's had room behind the seat for any long gun can think of, short perhaps of a punt-gun. I'm assuming the idea is you have to get into action real fast. What's a guy need to get into action so fast for? Zombie road-blocks? Check-stops when you don't feel like the breathilizer? Making a bank-heist get-away? Ventilating road-signs on-the-fly? Why do we need smaller and smaller guns for bigger and bigger trucks?
It's not an intuitive thing the way a saddle-carbine is intuitive.
actually a tikka and sako are the same steel and most of the time the same barell with a different stamp.Some years ago, an article by John Barsness described his 338 Win Mag - I think at the time he had a SAKO barrel on it - VERY hard metal, Barsness wrote - maybe SAKO still continues to be harder steel? I do not recall Barsness describing "how" he determined the SAKO steel to be harder - one would think about any barrel maker would be similar? I have sawed off several barrels - I am under the impression that "barrel steel" is not "hard steel" - although SAKO might heat treat it to harden it more than others??



























