I ordered through Coastal Gunstock and Sport Supply - no issues. PM your email addy and I'll send you the links and NAFTA paperwork I sent them. Please support them and S&K as these are amazing products!
Rimfire Pics...Show em off!!!
- Thread starter GameStalker30-06
- Start date
I ordered through Coastal Gunstock and Sport Supply - no issues. PM your email addy and I'll send you the links and NAFTA paperwork I sent them. Please support them and S&K as these are amazing products!
Here it is for the latest rounds of upgrades.
Total build sheet:
Bell and Carlson Thumbhole sporter stock
Bughole tuner
One piece blued Weaver rail
Silver high 1" Weaver rings
Bausch & Lomb Elite 4200 - 2.5X10-40mm
Volquartsen Exact Edge extractor and spring
Volquartsen extended bolt handle
Extended mag release
Kidd receiver pin kit
Buffer Tech buffer
Butler Creek fluted bull barrel
Rimfire technologies modified V block
Volquartsen hex take-down screw
Harris 6 to 9 bipod
Talon swivels
Outdoor Connection sling
Mods:
Polished hammer and restoned engagement angle to 2º
Polisher sear
Removed trigger return spring and plunger and replaced with cantilever spring
Added trigger over travel screw
Modified bolt release to auto release.
Total build sheet:
Bell and Carlson Thumbhole sporter stock
Bughole tuner
One piece blued Weaver rail
Silver high 1" Weaver rings
Bausch & Lomb Elite 4200 - 2.5X10-40mm
Volquartsen Exact Edge extractor and spring
Volquartsen extended bolt handle
Extended mag release
Kidd receiver pin kit
Buffer Tech buffer
Butler Creek fluted bull barrel
Rimfire technologies modified V block
Volquartsen hex take-down screw
Harris 6 to 9 bipod
Talon swivels
Outdoor Connection sling
Mods:
Polished hammer and restoned engagement angle to 2º
Polisher sear
Removed trigger return spring and plunger and replaced with cantilever spring
Added trigger over travel screw
Modified bolt release to auto release.
From the top down:
Ruger 10/22 with Archangel ARS stock, 50 Rd Pro-Mag drum (both from MysticPlayer) UTG foregrip (from Questar) and Tasco Red Dot, still waiting for my 18" GM barrel to arrive
Baikal MP-161K with Simmons 3-9x40
Crickett Target Model with Bushnell 4x32 Rimfire Scope
Henry AR7
Last edited:
That would be the Crickett Target Model, really accurate rifle but needs a far better scope as these old eyes arn't what they once were, actually giving consideration to putting that one in the Rimfire EE
here are my rimfires,
Nylon 66 22lr
Browning (made in Japan) 22 lr & short
squires bingham model 1500 22 mag.
I lost the clip but just made payment today for a pair of clips from a fellow board member. The gun was to ugly and beat up so I sanded it down and gave it a shot of olive green. I also did the click pen trigger mod. I love the difference in trigger pull.
Nylon 66 22lr
Browning (made in Japan) 22 lr & short
squires bingham model 1500 22 mag.
I lost the clip but just made payment today for a pair of clips from a fellow board member. The gun was to ugly and beat up so I sanded it down and gave it a shot of olive green. I also did the click pen trigger mod. I love the difference in trigger pull.
Last edited:
the top one is a 9422mag and the one below it is a 9422 trapper.
Has anyone ever seen a 9422 trapper with a 16in barrel? I hadn't till I saw this one so I had to have it
and a couple M6 scouts. Ones a 22/410 and the other is a 22 hornet
Has anyone ever seen a 9422 trapper with a 16in barrel? I hadn't till I saw this one so I had to have it
and a couple M6 scouts. Ones a 22/410 and the other is a 22 hornet
doubletap9
CGN Regular
- Location
- Niagara Peninsula
Here are a few AP-74 .22's I've been tinkering with ...
.. top one is bone stock ...
... the fake can and handguard on this one is a complete custom-from-scratch endeavour
..
.. and finally the A2 style build
The one with the fake can is so far the most accurate of the three .. .. it also gets the most attention at the range for some odd reason ....
DT
.. top one is bone stock ...
... the fake can and handguard on this one is a complete custom-from-scratch endeavour
..
.. and finally the A2 style build
The one with the fake can is so far the most accurate of the three ..
.. it also gets the most attention at the range for some odd reason ....DT
Last edited:
Its an old Savage sporster, not sure how old, says on the barrel 1917, still in pretty good shape, i take it shooting atleast once a week
Big D that rifle is a Savage model 1919, wich was to compete with the winchester model 52 target rifle, I believe it was unvealed at camp perry in 1919-20? Its hard to believe your rifle still has all its wood!! these rifles were spared no exspence in building these guns, they were also sold to the US Army for small bore training and competition. The US marked ones ussually had an serial # inscribed on the action, if it is a comercial gun the serial # is on the action at the very end where the bolt slides in. If you want more info. please PM me.Dale in T-Bay
Cz 16"
Just wanted to show off my new CZ 452 american 16”. Oh boy was I ever excited to get my package today.
Thank you sakoalberta
Got the scope on her soon after and went for some fun at the range.
She is beautiful, and not only that. I took her out to the range and she is defiantly a shooter.
The scope she has is an old bushnel banner 4x12 with an adjustable objective.
I even shot her at the 100 yards and the groupings were pretty good until it started to get windy.
Overall im very happy, the next step would be adjusting the trigger to something a bit lighter.
Just wanted to show off my new CZ 452 american 16”. Oh boy was I ever excited to get my package today.
Thank you sakoalberta
Got the scope on her soon after and went for some fun at the range.
She is beautiful, and not only that. I took her out to the range and she is defiantly a shooter.
The scope she has is an old bushnel banner 4x12 with an adjustable objective.
I even shot her at the 100 yards and the groupings were pretty good until it started to get windy.
Overall im very happy, the next step would be adjusting the trigger to something a bit lighter.
thank you.
its been a long wait to get this rifle in the 16" version but it was well worth it
- Location
- Lloydminster
They were a long time coming. Thanks for the patience. Looks like its a real shooter-but the 16" ones seem to be exceptional, so far.
Savage Stevens Mdl. 89
Since I collect single-shot .22rfs, here's one I was really happy to add to the collection - because of its classic "Western" look. This is a Savage Stevens Model 89. One of only 4 full-loop lever .22rfs I've been able to obtain so far.
May post some pics of the others later.
Best regards ~ ~ ~ mauser
Since I collect single-shot .22rfs, here's one I was really happy to add to the collection - because of its classic "Western" look. This is a Savage Stevens Model 89. One of only 4 full-loop lever .22rfs I've been able to obtain so far.
May post some pics of the others later.
Best regards ~ ~ ~ mauser
CannonFodder41
CGN Regular
- Location
- Terra periculosa
That looks kickass spenom. Love that cheek riser, exactly the look I'm trying to get on my Mark II.
