The SL8 Mods, Info and FAQ Thread

[CNADNSL8-5]

Now that you've had the opportunity to mount and play with it a bit, what do you think?

Wouldn't hurt my feelings to see it mounted either

Still not mounted. I'm not sure what trigger I want in it yet. SL8 or G36. (leaning to the G36) I'll post pics......

 

[nemesisincanada]

Does anyone know where I might get some HK parts from in Canada. I need 2 of there small push pins.

http://www.hkparts.net/shop/pc/HK-German-Push-Pin-for-Forearm-Or-Lower-Small-p75.htm

 

[CNADNSL8-5]

Does anyone know where I might get some HK parts from in Canada. I need 2 of there small push pins.

http://www.hkparts.net/shop/pc/HK-German-Push-Pin-for-Forearm-Or-Lower-Small-p75.htm

I don't think any dealer in canada would have those since they are for a gun only LE and Mil can have. These won't fit an SL8, G36, USC or UMP so I assume this is for a special project?

I think you will have to try the EE or source them from other countries.

 

[nemesisincanada]

They replace the tedious pins on the lower of the ISSC MK22, thanks for the info it helps.

 

[Novascotiaguy]

Does anyone know where I might get some HK parts from in Canada. I need 2 of there small push pins.

http://www.hkparts.net/shop/pc/HK-German-Push-Pin-for-Forearm-Or-Lower-Small-p75.htm

PM sent

 

[m_falafel]

Is the sl-8 restricted or not?

 

[bcham5]

is the sl-8 restricted or not?

non restricted!!!!!!

 

[zykopat]

non restricted!!!!!!

Out of the box, non-res, if you mod it with a shorter barrel, yes.

 

[xopher]

So once i get the parts, how hard is it to put the entire thing together? Will it require a special tool?

Im looking to install the folding stock, pistol grip and possibly the optic handle

 

[incorrigible]

So once i get the parts, how hard is it to put the entire thing together? Will it require a special tool?

Im looking to install the folding stock, pistol grip and possibly the optic handle

Bolt on... a short afternoon if you've never done one before. The hex tool that comes with SL8 is all you really need.

full conversion... a day or two if you have all the required parts and tools in place.

 

[xopher]

I am looking to purchase a top notch conversion SL8. Can anyone explain why this one is less desirable compared to the other conversions?

 

[polskadude]

The length of the folding stock is over 2.5" too long. You'll need very long arms to have a comfortable length of pull. It's also made of cheap plastic, and the fit and finish is poor.
Stock block is the way to go.

 

[xopher]

Are there any existing conversions that allow for the rifle to be fire folded?

 

[polskadude]

It's referred to as a Tom bostic conversion, or chopstic kid. Done by two individuals in the USA, they cut the sl8 reciever, add a brace, then attach the rear section of a G36. Then plastic weld or putty the gap. Followed by paint.
I don't know anyone in Canada that does this for customers. But some have done their own.

 

[incorrigible]

Are there any existing conversions that allow for the rifle to be fire folded?

http://www.canadiangunnutz.com/forum/showthread.php?t=495896

http://www.canadiangunnutz.com/forum/showpost.php?p=5258064&postcount=347

Take 5 min and read young Padawan... all will be revealed

 

[xopher]

Im looking for the HERA BCK Gen 2 kit. Anyone know where i can find one?

 

[polskadude]

Not in Canada yet.

 

[CNADNSL8-5]

Im looking for the HERA BCK Gen 2 kit. Anyone know where i can find one?

I just sent a message to Gravel myself. I'll post the response.

 

[xopher]

I also emailed even if they dont have it.. they might consider bringing it in now...

 

[furet]

yes.... please, with the ACR stock version.