Ruger 10/22 upgrades
- Thread starter Sean17
- Start date
Is it worth it getting a titanium firing pin? And when I get the extractor,trigger kit, and extended bolt release should I let a gunsmith install them? Or is it so easy I should just do it myself. And will gunsmiths even take easy jobs like that.
since this picture i have "blued" the bolt... its pretty much black now
i dunno if u can see it but i have also put red nail polish (laugh if u want lol) into all the lettering, serial number and logo on the reciever, as well as painted my trigger red.... you can also purchase pretty much this exact set up, (with a Dlask reciever... which will be here shortly) RIGHT from dlask for about $550..... but i thought building was so much "funner"
Don't wanna sound like a downer, But you're not going to get much for $300.
I've close to if not more than $1200 into my 10/22.
The best thing you can do for yourself is the bolt release. 2nd is radius your bolt add an extractor and polish your trigger parts.
Next i would replace the stock and barrel. This won't be cheap. And since you'll need a scope/optics for the new bull barrel, This is another expense, Along with rings for the optic.
I've close to if not more than $1200 into my 10/22.
The best thing you can do for yourself is the bolt release. 2nd is radius your bolt add an extractor and polish your trigger parts.
Next i would replace the stock and barrel. This won't be cheap. And since you'll need a scope/optics for the new bull barrel, This is another expense, Along with rings for the optic.
Innercity is right, this setup is not cheap, just as far as the looks department goes....
i started with a deluxe sporter 10/22 $300, barrel and stock shipped and taxes was $287 i believe and cheap muzzle break $25, 2.5-10x42 tasco and rings (used) $60.... im into this thing for $672 not counting the extra mags, target hammer, extractor, all the polishing, and the like....
i started with a deluxe sporter 10/22 $300, barrel and stock shipped and taxes was $287 i believe and cheap muzzle break $25, 2.5-10x42 tasco and rings (used) $60.... im into this thing for $672 not counting the extra mags, target hammer, extractor, all the polishing, and the like....
Damn might have to hold off for awhile then. Maybe just get the extractor,bolt release and trigger kit for now. Can I just hand if off to a gunsmith and let him do some work on the trigger? Also what kind of magazines do you guys use.
Yup it's not cheap for a good build. I'm into mine for roughly $1500. An extractor, and hammer and sear is well under $100. Auto bolt release is free and so is chamfering the bolt. This will make your rifle shoot much better. Then figure out what u want for a barrel and stock... Save up and go from there.
I just did the math.... Over $1500! Ouch!
I just did the math.... Over $1500! Ouch!
When I did the trigger job, Hawktech Arms. They don't ship to Canada now. The tg2000 trigger assembly from the dealer in bonnyville ab.
- Location
- Edmonton, AB
Just Wondering if anybody knows a place to get a nice muzzle break. Any input would be appreciated.
Cheers, Monk.
Cheers, Monk.
Who made the parts for your trigger? Or did i miss that???
