hey guys my svt 40 doesnt have the notch and grooves for a scope mount, have any of you mounted a sks choate scope with scuccess. I would love to hear if you guys have tried something that works and holds a solid zero. What are my options?
want to scope svt 40
- Thread starter olympia
- Start date
The Choate and Promag mount to the side of the receiver on an SKS. The only good way to scope one as far as I'm concerned. There is a narrow flat surface on the SVT that might be suitable, not sure how solid of a mount it might be though. Why not try to trade someone for a rifle with the rails and get it done up right?
i may have something for you soon , im presently working on a scout mount to replace the rear sight , the drawing is nearly done , have to decide if i pay for a 3dprinted one to check the fit and if that work or find a machine shop and start now with the aluminum
- Location
- pallisers triangle
why not ive done it. no different than drilling and tapping anything else
http://www.canadiangunnutz.com/forum/showthread.php/987291-SVT-scoped-pics
Here's the war time solution. This scope and mount were found in the old house near Kyiv, Ukraine, where the defensive line of 1941 was. Of course it's not the best solution, but hey, at least it's historically accurate and you don't have to bubba your rifle. I can post more pics if there's any interest.
- Location
- pallisers triangle
It does not look like you have done anything.
you must be blind then didn't happen to notice the very first rifle in the thread did you.
here just incase you didn't have your glasses on yet thismorning
####ty pics, but they are there. that is a VEPR mount. fits perfectly no wood had to be removed. BUT you cant drill and tap a SVT 40 you say, ok then
Last edited:
- Location
- Vancouver Island
Here's the war time solution. This scope and mount were found in the old house near Kyiv, Ukraine, where the defensive line of 1941 was. Of course it's not the best solution, but hey, at least it's historically accurate and you don't have to bubba your rifle. I can post more pics if there's any interest.
I'm interested in this! Please post more!
you must be blind then didn't happen to notice the very first rifle in the thread did you.
here just incase you didn't have your glasses on yet thismorning
####ty pics, but they are there. that is a VEPR mount. fits perfectly no wood had to be removed. BUT you cant drill and tap a SVT 40 you say, ok then
If that is screwed to the receiver then show me.
- Location
- pallisers triangle
you are blind. first pic 2 #8x40 screws what do you think the round holes on ea end are for do a lil research and have a look online before you start showing how much you know
I even told you who made the mount. but if you need to, here ya go again can you use google
MOLOT Vepr/AK/Saiga Extra Low Profile
I even told you who made the mount. but if you need to, here ya go again can you use google
MOLOT Vepr/AK/Saiga Extra Low Profile
- Location
- pallisers triangle
http://s137.photobucket.com/user/maxpowerbuick/media/svt 40 vepr/IMG_09481_zpsf7947a93.mp4.html
there u go Mr Lieman altho I really don't know why im worried about what a troll like you thinks
there u go Mr Lieman altho I really don't know why im worried about what a troll like you thinks
Last edited:
- Location
- pallisers triangle
and I don't care.
