attackbeaver
CGN Regular
- Location
- Some place
maybe some users add it, but some of the MEU i've seen have the low profile mag wells. however great job i do like. really can beat the norcy for a base build.
maybe some users add it, but some of the MEU i've seen have the low profile mag wells. however great job i do like. really can beat the norcy for a base build.
Here is my attempt at a MEUSOC. This gun started as a Norinco "Police" model 1911. First thing was to tear it down, clean and strip the finish, do a dehorn on all sharp edges. Due to the fact that this gun already had dovetail front sight, one was made to work with this dovetail. Next was to Mil-Spec parkerize all the parts. The rear sight is a Millett Mark 1 fixed. Trigger is a Wilson Combat, the full length guide rod was removed and a standard plug installed. The hammer is a Colt Commander hammer tuned to an STI sear with trigger set to 3.5lbs. Mainspring housing is an S&A flat checkered unit with lanyard loop and to finish it off, original style Pachmeyr grips installed.
![]()
![]()
![]()
![]()
![]()
This project came together quite well and although not 100%, I am really happy with it. I have a little over $600 Canadian into this gun not including the 15 Wilson magazines and so far I am able to shoot decent 1 hole groups with it @ 25yards. Already in the works is my next generation MEUSOC M1911, this one will sport Novak sights and Gunner grips, pictures will be posted when the project is done.
I would like to thank the following who helped this project come together, mlin and digdeep74 over on the 1911Forum who sold me the rear sights, grips, mainspring housing and trigger, Casey at Tactical Ordnance who did his normal outstanding work and my friend and mentor Ray Canning who helped me gain the outstanding accuracy this gun now shoots, unfortunately, Ray passed away before he could see the end results, but it shoots this way thanks to him, he would be very proud and happy, RIP buddy, this gun is dedicated to you.
Wow that looks nice, I just ordered a new police model with from ARMCO with his tuning. Where did you buy the spare mags?
Here is my attempt at a MEUSOC. This gun started as a Norinco "Police" model 1911. First thing was to tear it down, clean and strip the finish, do a dehorn on all sharp edges. Due to the fact that this gun already had dovetail front sight, one was made to work with this dovetail. Next was to Mil-Spec parkerize all the parts. The rear sight is a Millett Mark 1 fixed. Trigger is a Wilson Combat, the full length guide rod was removed and a standard plug installed. The hammer is a Colt Commander hammer tuned to an STI sear with trigger set to 3.5lbs. Mainspring housing is an S&A flat checkered unit with lanyard loop and to finish it off, original style Pachmeyr grips installed.
This project came together quite well and although not 100%, I am really happy with it. I have a little over $600 Canadian into this gun not including the 15 Wilson magazines and so far I am able to shoot decent 1 hole groups with it @ 25yards. Already in the works is my next generation MEUSOC M1911, this one will sport Novak sights and Gunner grips, pictures will be posted when the project is done.
I would like to thank the following who helped this project come together, mlin and digdeep74 over on the 1911Forum who sold me the rear sights, grips, mainspring housing and trigger, Casey at Tactical Ordnance who did his normal outstanding work and my friend and mentor Ray Canning who helped me gain the outstanding accuracy this gun now shoots, unfortunately, Ray passed away before he could see the end results, but it shoots this way thanks to him, he would be very proud and happy, RIP buddy, this gun is dedicated to you.
This oughta get things back on track:
![]()
DRRRRRRROOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOLLLLLLLLLLL.
Photoshop or a real collection?
probably someone's, not mine. Mine wouldn't even cover one row. Yet.
45 - 1911's....
Photo was clipped off 1911 Forum, no?
![]()
NAA.
No worries it is a most appropriate pic for this thread. Some of them, well okay, all of them are worth drooling over....
![]()
NAA.
xdtalk.com/forums/m1911/21073-official-m1911-picture-thread-56k-dial-up-beware-78.html#post2289144Top row: Springfield TRP, Springfield GI, Springfield TGO1, Infinity custom build, Para GI Expert, Para 1911 Limited, Sig STX, Dan Wesson Valor, Dan Wesson CBOB
2nd row: Thompson Custom 1911, Auto Ordnance GI, Colt Commander XSE, Colt Special Combat Government, Colt Gold Cup, Nighthawk Predator II, Nighthawk Enforcer, Pistol Dynamics custom build, Taurus PT 1911
3rd row: Les Baer SRP, Les Baer Concept V, Ed Brown Classic Custom, Ed Brown Kobra Carry, Firestorm DLX, Rock Island
Armory GI, Norinco GI, Smith & Wesson SW1911, Smith & Wesson PC1911
4th row: Volkmann Combat Custom, Kimber Pro CDP II, Kimber Custom II, Kimber Super Match II, Yost custom build, AMT Hardballer, Unertl DLX, Ithaca USGI, Remington Rand USGI,
Bottom Row: Charles Daly EFS, Wilson Super Grade, Wilson CQB, Detonics ServiceMaster, Rock River Arms Limited Match, STI Trojan, STI Spartan, STI Legacy, Fusion Commander Elite
He must have a fondness for 1911,s LOL
Just got my Argentine Colt back, I wish I could say I did the work myself.
My pictures don't do it justice.
Yes, it was Nick. The guy is amazing! I never expected it to look as good as it does.
The serial number is on top of the slide, on the barrel, and behind the mainspring housing on the frame.
Nick almost did too good a job. I'm afraid to even touch it, let alone shoot it. Seriously, I've only handled it by the grips since it came back.
I have to say it as part of the custom.....if you ever decide to sell it, call me first.Awe-some.