DrakeriderCa said:
http://www.gunaccessories.com/AR15-M16Parts/FlashHidersCompensators.asp
$44 USD plus shipping... cheap from my point of view...
AR-15's
- Thread starter Nats
- Start date
http://www.gunaccessories.com/AR15-M16Parts/FlashHidersCompensators.asp
$44 USD plus shipping... cheap from my point of view...
IDPACONVERT
CGN frequent flyer
- Location
- The Fringe(GTA)
It's still not finished yet, but I'm getting there;
- Mil-Spec A4 Flat top Upper
- 7.5" DPMS heavy barrel, and bolt group
- NOVESKE KX3
- Vltor FF Modular for-end with Picatinny Rails
- Heavy duty for-grip with removable side panels for pressure switches and a sealed battery storage space in the bottom
- New ELCAN Scope 3.4X with Tritium
- 6 position collapsible Butt Stock with a CAA SopMod attachment that has a sealed compartment on each side that holds up to 3 spare 3V batteries, and also double sling plates.
- GG&G Ambidextrous Single point sling plate
- Houge Pistol Grip
- Mil-Spec A4 Flat top Upper
- 7.5" DPMS heavy barrel, and bolt group
- NOVESKE KX3
- Vltor FF Modular for-end with Picatinny Rails
- Heavy duty for-grip with removable side panels for pressure switches and a sealed battery storage space in the bottom
- New ELCAN Scope 3.4X with Tritium
- 6 position collapsible Butt Stock with a CAA SopMod attachment that has a sealed compartment on each side that holds up to 3 spare 3V batteries, and also double sling plates.
- GG&G Ambidextrous Single point sling plate
- Houge Pistol Grip
- Location
- calgary, AB
Not that I could afford one, but what licinse do you need to own one? For a civi. Would a restricted suffice?
Here's my first AR. 
It's a LMT Defender 2000 lower and a 16" (M4 profile) upper with chrome lined barrel, 1/7" twist and MP tested. The stock is a collapsible SOPMOD. For now, the only upgrade that's been done is the flash suppressor. I've put a YHM Phantom.
Next one is with my Chris Reeve Greene beret knife (5.5")
Next 2 are with my new built Win 70 mounted on a Macmillan M40-A1 Camo.
Now, i have to figure what kind of optical sight i'll put on the AR and what kind or forearm rail. On the Win. 70, i'll, put a 2.5x10-42mm Swarovski that I already have.
It's a LMT Defender 2000 lower and a 16" (M4 profile) upper with chrome lined barrel, 1/7" twist and MP tested. The stock is a collapsible SOPMOD. For now, the only upgrade that's been done is the flash suppressor. I've put a YHM Phantom.
Next one is with my Chris Reeve Greene beret knife (5.5")
Next 2 are with my new built Win 70 mounted on a Macmillan M40-A1 Camo.
Now, i have to figure what kind of optical sight i'll put on the AR and what kind or forearm rail. On the Win. 70, i'll, put a 2.5x10-42mm Swarovski that I already have.
Greenhorse six
CGN Ultra frequent flyer
Sweet Knife.
Tks Maurice. I was hoping to have it back together for the shoot last weekend but the air cured gun kote I tried on the furniture didn't stick. So I had to strip it and use the spray paint. the fun never ends. 
I heard someone beat your score with the 9mm..is that true?
I heard someone beat your score with the 9mm..is that true?
Maybe? Seriously? Well, that IPSC timer is from the stone ages, the old black box with white button. I had to reshoot the first stage, as the timer was not picking up my shots (it said 1.31 seconds, 2nd run on that stage was 16 seconds). stage #1- 16sec, stage #2- 7secs?, stage# 3 -9.05seconds; my total time was 36 seconds for the whole course at once. When I left no one had beat any of my times, even with revolver. Jean Guy was a close 2nd to me last year.
Well, that IPSC timer is from the stone ages, the old black box with white button. I had to reshoot the first stage, as the timer was not picking up my shots (it said 1.31 seconds, 2nd run on that stage was 16 seconds). stage #1- 16sec, stage #2- 7secs?, stage# 3 -9.05seconds; my total time was 36 seconds for the whole course at once. When I left no one had beat any of my times, even with revolver. Jean Guy was a close 2nd to me last year.
Last edited:
Darla and The Gimp
After a LONG dry-spell I FINALLY made it out to the range for an afternoon of shooting. I took my AR-15's out to Stittsville and had a BLAST!
Here are some pics of "Darla" and "The Gimp".
Darla:
- DLASK Lower with A2 Stock and A3 upper
- DPMS 20" HBAR 1/7
- Bushnell 4-12 scope (soon to be replaced with a ACOC clone)
- Brass catcher
The Gimp:
- Armalite M15a4 14.5 HB upper
- Armalite Lower
- NM trigger group
- ARMS #40L sight
- Fobus handguards
This was the first time that I tried Darla at 300m. She worked well and I ended up with a nice 10shot 5" group at 300m with 62gr SS109 bullets. Good enough for me!
TomZ
After a LONG dry-spell I FINALLY made it out to the range for an afternoon of shooting. I took my AR-15's out to Stittsville and had a BLAST!
Here are some pics of "Darla" and "The Gimp".
Darla:
- DLASK Lower with A2 Stock and A3 upper
- DPMS 20" HBAR 1/7
- Bushnell 4-12 scope (soon to be replaced with a ACOC clone)
- Brass catcher
The Gimp:
- Armalite M15a4 14.5 HB upper
- Armalite Lower
- NM trigger group
- ARMS #40L sight
- Fobus handguards
This was the first time that I tried Darla at 300m. She worked well and I ended up with a nice 10shot 5" group at 300m with 62gr SS109 bullets. Good enough for me!
TomZ
Last edited:
