C7A1 lookalike rifle

ajagcapt

ajagcapt

Member
Rating - 100%
91   0   2
Hi all. I would like to acquire a rifle that is as close as I can get to the C7A1 that I used (although infrequently) in the service. I hesitate to say clone, because in reading through the various threads CGN members have put out a great deal of useful information on how to build a rifle using individual parts (i.e. Dlask stamped lower, thermoset hand guards etc.). However, I am not particularly handy and am looking to purchase "off the shelf" the most closely resembled rifle available and attach a C79. The only recommendation I have seen is for Stag Arms 4R, but these posts are a couple of years old. Is this still the best choice? I would also appreciate any tips which members may have that would make such a rifle more realistic like magazines, cleaning kits or anything else which would not require an armorer to install. :) Thanks for your help.
 
Get atrs to build one for you. Just tell that that you want something that looks exactly like a c7 A1, it wont be cheap but itll be beautiful
 
Are you just looking for a basic reliable AR-type that can simulate the C7A1 for nostalgia? Or are you looking for just an AR-type platform in general. I don't know too many who would deliberately look for a plain jane, fixed buttstock AR (there are purposes and preferences) but it isn't common place.

Stag Arms is just one of many totally serviceable, usable AR makers.

One of my best friends is a JAG. Random point.
 
I recently put together a Bushmaster retro NM A3 20"....not as easy to find these parts anymore for a.build.
 
A C7A1 lookalike is easy to do. Stag Arms 4R is still the closest off the shelf rifle for a C7A1. The ones Arms East brings in are different then the standard US versions as the ones we get have the Govt. profile 1/7 twist barrel similar to what is on the C7. All you really need is a Elcan and apart from the markings and the lack of a fun switch you wont be able to tell the difference.
 
I was hoping to get something that would, as closely as possible, approximate the look and feel of the C7A1 without requiring too much technical building knowledge.
 
LeeEnfieldNo.4_mk1 said:
A C7A1 lookalike is easy to do. Stag Arms 4R is still the closest off the shelf rifle for a C7A1. The ones Arms East brings in are different then the standard US versions as the ones we get have the Govt. profile 1/7 twist barrel similar to what is on the C7. All you really need is a Elcan and apart from the markings and the lack of a fun switch you wont be able to tell the difference.
Click to expand...

Thanks.
 
It must be cold in hell, someone is recommending High Standard.
Pinned muzzle devices or unthreaded barrels were US export requirements for a number of years. That is why you will find them on all brands if you look long enough. Easy to fix, it is just a pin and a couple of small welds.

That said Arms East will make the changes for the buyer.
 
If you want something that looks like this:



You just need to buy an AR15A3 or AR15A4 or clone thereof, then install the ambi charging handle and TRIAD mount, if you can find them, and a C79A1 or C79A2 sight. Look for a 1:7" chrome-lined barrel. You can also use the ambi mag release (the correct one available from Brownells) and an ambi-safety, if you can find a CF one to install.
 
Last edited:
The ambi-mag catch is a Norgon. Use a better ambi-cocking handle. The CF one is junk and breaks often. Upgrade it to a BCM Ambi gunfighter or Badger Ord. or something. Stag prices aren't bad. Buy and build quality. Buy once, cry once. Good luck finding a TRIAD.
 
I like the nostalgic feel of the A1 and the rigid full stock was nice for control and weight distribution, I to would like to know more about this 30th anniversary deal.
 
You must log in or register to reply here.
Back
Top Bottom