CQBR / Mk18 Mod1 Clone thread - Show us your clones!

[Rebel Rouser]

When are those Surefire Training Suppressors supposed to arrive? Anyone here order one?

I see Martin has got some Surefire FH and diffusers.

 

[Stoner99]

When are those Surefire Training Suppressors supposed to arrive? Anyone here order one?

I ordered the 3 prong one of Irunguns. I want too see the results on the training suppressor. Either that or all go with the warden instead. Probably will buy both in the future.

 

[iloveak47]

Warden when used with the 3p acted kinda like a linear comp, so should probably act the same in a training supressor.

Anyone with the gen 2 lmt sopmod (with qd)? Is the sicket limited in it's rotation at all? I owned one before but i don't remember. Since i don't clone at the moment i am thinking of maybe trading my gen1 for one with the qd.

 

[Tarrantula]

Warden when used with the 3p acted kinda like a linear comp, so should probably act the same in a training supressor.

Anyone with the gen 2 lmt sopmod (with qd)? Is the sicket limited in it's rotation at all? I owned one before but i don't remember. Since i don't clone at the moment i am thinking of maybe trading my gen1 for one with the qd.

Mine spin freely all the way around in both ports.

 

[iloveak47]

Ok thanks, what about the b5 sopmod? Anyone has one?

 

[Mister Donut]

Ok thanks, what about the b5 sopmod? Anyone has one?

I've got a b5 gen 2, will check when I get home later.

ETA:

https://2.bp.########.com/-i-vnXg61YJk/WeQDGTG2-8I/AAAAAAAAqus/Xz9HhNjY0v8bR7f-8x6yCdG6DPOinlwFwCKgBGAs/s1600/PA152397.JPG

It does not spin in the socket. Both sides of the B5 gen 2 are like this.

 

[Mister Donut]

I finally got around to installing the 4 prong onto the Mk18 upper. It was kind of a pain in the #### because I had to take the rail off the upper to get to the KAC flash hider (it was inset just enough I couldn't get a wrench into it to take it off).

https://4.bp.########.com/-JxiASTFOnbM/WdmdNhZsJeI/AAAAAAAAqew/G98JeP3sDZkR0PPo2SqZmFIjgffGHYV4QCKgBGAs/s1600/PA032140.JPG

https://2.bp.########.com/-_f-U865jDe0/WdmdNv5JlNI/AAAAAAAAqew/UU37WCpxv3YUSpHOSfCDb_vxDj-YMgrRQCKgBGAs/s1600/PA032141.JPG

https://2.bp.########.com/-ZBRztDQaoMw/WdmdNqCCZ0I/AAAAAAAAqew/VNEefF8JcRoFo0UXt3CjSGRDrGOVfTG7wCKgBGAs/s1600/PA032147.JPG

https://2.bp.########.com/-aXfT2UC_mSI/WdmdNrPxEtI/AAAAAAAAqew/X-grPMOsoZM-2DclTMt4up6zuGcJkRaZgCKgBGAs/s1600/PA032152.JPG

https://1.bp.########.com/-YkQ-PM7zk38/WdmdNpKIY4I/AAAAAAAAqew/4NktyuzMvGUo-s3M9-4lvC4cDVWwtnDvQCKgBGAs/s1600/PA032153.JPG

The pile of parts that came off to get to the flash hider


https://3.bp.########.com/-9n5t6g9uWcQ/WdmdNvcwlQI/AAAAAAAAqew/RdDusy4GSxMVMGH1oNOnSpC8ltP7xVBwQCKgBGAs/s1600/PA072166.JPG

Comparison with the Smith Enterprises flash hider

https://2.bp.########.com/-6bUzVHanM84/WdmdNvh6NpI/AAAAAAAAqew/qg8tp-Fky0cpnIZs9MBYidPgGV-LD-tkACKgBGAs/s1600/PA072167.JPG

 

[Mister Donut]

A couple of weeks ago, I threw some fresh Krylon on the upper and the lower as well. It just about killed me to paint a fresh black LE6920 lower, but there was a minor blemish in the front of the magwell, and it was dirt cheap, so in the end, I didn't feel so bad.

https://4.bp.########.com/-64KYiA80dow/WdmdNhnHI3I/AAAAAAAAqew/TmpBX8N_kgQUZkKi6C53jqLN-WN9zZoywCKgBGAs/s1600/PA012138.JPG

Anyway, after a few range trips, the paint is already wearing off.

https://3.bp.########.com/-aEKNQ5lwkhk/WeQDGWfNNNI/AAAAAAAAqus/u6OCdoqsnQw1ot-r5Cd-p9nPBId_JkycgCKgBGAs/s1600/PA152373.JPG

https://3.bp.########.com/-EzZVPZefp3E/WeQDGXwyI-I/AAAAAAAAqus/GiWlHDCe-lsco4J-KeUf--Wml0YhIh0-gCKgBGAs/s1600/PA152374.JPG

https://3.bp.########.com/-OFrwrrH7EIU/WeQDGQFE6tI/AAAAAAAAqus/3x8LRNGGjugMlYohKOehpET8oRLRF2MEQCKgBGAs/s1600/PA152377.JPG

https://1.bp.########.com/-Oob-HQUBIs0/WeQDGZ5TCkI/AAAAAAAAqus/NdQd-PzPKNYOLg2svZTFprctJx1E7Eh6wCKgBGAs/s1600/PA152385.JPG

 

[mikethebike]

looks nice

 

[Mister Donut]

looks nice

Thanks

Now that the Surefire is on there, I may have to bite the bullet and get one of those Wardens or maybe even the trainer.

 

[onetwentyish]

Thanks

Now that the Surefire is on there, I may have to bite the bullet and get one of those Wardens or maybe even the trainer.

Looks like you need a real Peq-15.

 

[Mister Donut]

Looks like you need a real Peq-15.

Almost went looking for $1,000 for that black one until I found out it wasn't the real thing.

Think the last time I saw a real one listed, it was going for $2,000.......ouch.

 

[onetwentyish]

Almost went looking for $1,000 for that black one until I found out it wasn't the real thing.

Think the last time I saw a real one listed, it was going for $2,000.......ouch.

My FDE one is up for $50 less.

Payment plan is an option.

 

[Rebel Rouser]

It's a commercial, it's not the real deal.

 

[Mister Donut]

I see you have an LMT Gen 1 for sale

https://www.canadiangunnutz.com/for...K-Receiver-Extension-Slings*Added-more-stuff*

Guys, someone grab it, it's a good deal. Half of what I've seen them sell for on Fleabay USA.

I would, but I have a few already

 

[onetwentyish]

It's a commercial, it's not the real deal.

Indeed that is correct, it is the commersial and the real deal, just not the controlled model w high output diodes, but unless you are calling in air strikes the controlled version isnt really of any use over the Atpail-c, other than to showboat how much money you have or used to have.

 

[Repper]

I see you have an LMT Gen 1 for sale

https://www.canadiangunnutz.com/for...K-Receiver-Extension-Slings*Added-more-stuff*

Guys, someone grab it, it's a good deal. Half of what I've seen them sell for on Fleabay USA.

I would, but I have a few already

I already sent Rebel a message on the LMT. Fingers crossed I'm first in line

 

[Mister Donut]

https://www.canadiangunnutz.com/for...M4-or-MK18-builds)-LED-upgraded-head-(factory)

For anyone looking for a light

Cheaper than what I paid.

 

[iloveak47]

the ee is good for cloners these days!

 

[Mister Donut]

the ee is good for cloners these days!

Speaking of great deals, there's a DD 12" rail for $200 right now, not sure if this can be used for any sort of clone, what length handguard does a newer M4 use?

https://www.canadiangunnutz.com/forum/showthread.php/1617707-AR-BCG-and-Literail