Glock will not send out the new ejectors. The will only send them to certified Glock Armourers. They want you to send the gun in to them or a warranty depot to have them replaced. There have been complaints on both the Gen 3 and 4's on the G17 and G19's about casing ejecting towards your face. Glock is only replacing them in the Gen 4's. What you have to do is buy the trigger housing assembly with the new ejector and change it out yourself. But...Glock is not sending the new trigger housing assemblies out yet. They are all going into the new guns right now. When I called Glock a few weeks ago they said that they will be sending out the housings soon to places like Glock Parts, Glock Store etc. Trigger housing assemblies are cheap, like around $10. I have one on backorder from Glock Parts, I'll call them tomorrow to see if they have it yet.
Glock Gen 4 RSA Exchange
- Thread starter jackrabbit000
- Start date
Glock will not send out the new ejectors. The will only send them to certified Glock Armourers. They want you to send the gun in to them or a warranty depot to have them replaced. There have been complaints on both the Gen 3 and 4's on the G17 and G19's about casing ejecting towards your face. Glock is only replacing them in the Gen 4's. What you have to do is buy the trigger housing assembly with the new ejector and change it out yourself. But...Glock is not sending the new trigger housing assemblies out yet. They are all going into the new guns right now. When I called Glock a few weeks ago they said that they will be sending out the housings soon to places like Glock Parts, Glock Store etc. Trigger housing assemblies are cheap, like around $10. I have one on backorder from Glock Parts, I'll call them tomorrow to see if they have it yet.
Try the new spring first.
What you are describing is usually due to a very stiff recoil spring.
I once had a Steyr-MP9 which would toss the brass straight back and into my eyes (i.e. safety glasses). Not cool, but once the spring relaxed a bit it started ejecting properly.
Ya ill try the new RSA first, didnt really notice any ejection problems but when I paid attention they seem to not be very consistent with direction of flight. Hard to tell tho cause in a small shooting bay they mostly bounce off the wall anyways so I cant tell how the grouping would look if they were are flying out unimpeded.
Can anyone speak on the failure to feed due to limp wristing issue as well?? Idk if this actually causes FTF's but like I said I myself have put about 1700 rounds through it without so much as a hickup but the 300'ish rounds my GF shot had 4 FTF's during to shoots and was always 2 FTF's back to back!
Can anyone speak on the failure to feed due to limp wristing issue as well?? Idk if this actually causes FTF's but like I said I myself have put about 1700 rounds through it without so much as a hickup but the 300'ish rounds my GF shot had 4 FTF's during to shoots and was always 2 FTF's back to back!
Camia Headen
RSA Team
877-745-8523
770-432-1202 ext 6401 OR;
RSATeam@glock.us
Thats how I got in tough with them and the response was fast!!! Id say rifle off an email and they will forward it to police ordinance aka their canadian contact. I was quoted a 2-4 week waiting time till delivery for the RSA!
RSA Team
877-745-8523
770-432-1202 ext 6401 OR;
RSATeam@glock.us
Thats how I got in tough with them and the response was fast!!! Id say rifle off an email and they will forward it to police ordinance aka their canadian contact. I was quoted a 2-4 week waiting time till delivery for the RSA!
yea, the woman i spoke with wanted to know if the pistol was my duty pistol or my carry. I told her neither as I'm not a cop and Canadian. "Ahhh ok" she said and i had the RSA in a week. { instead of coming from the states, she most likely issued a Canadian distributor send the RSA}
Actually, now that you say that, when I was shooting my Glock, I had a casing eject at a wierd angle and onto my sleeve. I had to do some strange movements, before it burned through my sleeve.
EDIT: Calling now- as painless as removing a bandaid from your nipple :razz: I joke. Will Glock send instructions as to how to take down and replace the RSA for us who don't have proper experience taking down their pistol?
Hi Djmay71, you'll receive all the proper instruction with your new RSA from Glock. It's pretty simple if you know how to field strip you Glock, you know how to change your RSA!(If not try youtube)
Shooter1of38
CGN Ultra frequent flyer
It takes all of 2 minutes. Have you really never field stripped your gun???
I've cleaned the bore twice, and put oil on the exterior metal finishes to prevent surface rust, but I've never felt the need to field strip.
Yes it is: watched a 3 minute video, and went and did it. Easier than I initially thought.
Just how hard did you actually think it could be.....
redddogg69
CGN Ultra frequent flyer
- Location
- Burlington/ON
I did- but then I realized I know too little of firearms. /stupid-idea.
