Gunsmith to avoid in Calgary AB

Status
Not open for further replies.
Jwirecom109 said:
I was just sent an email and was updated on something interesting.

A couple of the sites he stole pictures from have been contacted and contacted twister himself. ouch...

also the same person has been emailing his the sites he sponsers and has his links on and is letting them know he has been stealing pictures and saying that they are his own.
and has had a couple responses.

He was also a member on twisters gun shop website untill recently and was questioning twister on the pictures we found and wanted answers he said he never got them. and twister removed his access to the forum, and he said then twister tried to remove the link to the forum.

Apperntly twister can't take the heat.

Anyways the person asked me not to say who he s but, i wanted to thank him anyways.
Click to expand...


Just was forward this email from the person notifying people as per above

"###x, thank you. I will be following up with Twisters for an explanation, though I fully expect to have his advertising removed from the site in short order. I’ve also located the thread on GunNutz and I can assure you, in no way does that business have any affiliation with GunAuction.ca outside of site sponsor, which is also likely to be short lived. We do not need the support of a business whom does not hold honesty, integrity and customer satisfaction in the highest regard. Thank you for notifying us, very much appreciated ###x.



Regards,



GunAuction.ca Administrator"


Good to see people don's support people that lie and steal even if it does mean they lose abit of profit
 
well if u check its more about the gun shop then anything else, with everything else falsifed i would guess its all bs too.

plus twister always said all his daughters used fake names for everything cause they are super models, so how do we even know they were models.

dont know how a super model has time to go to Harvard University.

and if u check the time lines over lap for her modeling career and her time at Harvard University.

A master at Harvard University is a full time gig there isnt anytime to go off and work for months on shoots.

Everything out of the man's mouth seems to be "Twisted" with lies.

She is also the shop manager but i've been in there lots and she aint EVER been there.... so does she exist?

There are lots of fake profiles all over the net, hell i have a second facebook account.
 
Probably like put up some pics of some pretty girls and try to get lots of guys comming to the gun shop.....
thinking that's the way i see it
like others said the first 2 pics were probably his the last few
were in his mind or a make believe world of his
pics of celebs??
 
When he first told me about his daughters and their modeling careers, and all the models he knew i told him he should get them all to come to the shop or a gun show and do a promotion, who wouldn't want to meet a super model with a gun.

He told me he didnt want his daughter and her friends to make his biz, now i am thinking its cause he didnt really know them at all and he was just trying to talk up who he knew, kind like the work he posted on his website of our people's work.

he said he make guns for some of the most well known super models and movie stars (all women). he has a book with all their pictures in them "signed" but how hard is to print off a picture and get someone with nice writing to sign it for you.
 
Unfortunately some, if not all of you have received some sort of emaillately, from parties unknown to Twisters Gun Shop. We’ve received them, alongwith a certain number of threats for myself and sister’s Michy & Nikkibeing Femme [We are Lesbians for those of you unfamiliar with the terminologyof our world].



Twister is not writing this email, but has requested me, Tatyana Hiltz,Shop Manager & a Gunsmith myself, to address the issues raised lately.Reason being, Twister, whom is my adoptive Dad, fully admits that he is quitehonestly, not the person to address the public. He admits openly to being givento cussing too much and using language that may be considered by some,offensive. This has always been our reasons for having myself, create, design anddo 98% of the writing on the website, Twister’s Facebook page, and Twitter.Frankly Twister calls himself “facebook illiterate”, he does not handle much ofthe shops communication himself. Occassionally he does use the shops email tocommunicate, as you’ve undoubtedly noticed.



That being said…yes we did “use” fotos for advertisements on the siteand Twisters Facebook page. Yes, Twister approved them as in his words “theymake damn good advertisements”. There was no malice or ill intent from Twisterhimself or Twisters Gun Shop. We are a small shop, created adverts that somefound unacceptable. When we were requested to remove the fotos…we compliedimmediately. We complied so as not to cause problems or issues with thosetelling us they owned the fotos, pieces in them, etc. The fact that we now havesome small minded, vulgar twits attacking the shop and our website members, ismerely an unfortunate circumstance we cannot control. Thus we have shut theForum down and locked everyone out of it. It’s debatable wether we shall have aforum again, or at least until we find a way to have much more control over thecrude and vulgar language that was used. Twister will not have Ladies on thesite subjected to such ignorant, offensive talk and language.



As for Mr. Nathan Cook…if he had a receipt for having paid Twisters GunShop the $20.00 he’s claiming to have paid, he would have already been issued arefund. We do not conduct business thru Facebook messaging, as Twister does notreceive these messages all that often or regularily. And we received nocommunication thru either twistguns@gmail.comor info@twistguns.com or by telephonefrom Mr. Cook. Nor do we have a receipt issued to him for paying the alleged$20.00 he claims. Yes he requested a trigger guard be made. We do not oftentout ourselves as part fabricators, but agreed as Mr. Cook was a clientalready. Since he wanted to use the rifle, a stop gap measure of a loaner,plastic trigger guard off of Tammy’s Savage 22 was jury rigged to his rifle toprevent an accidental discharge. Apparently this has been posted on severalforums and such as an example of our work. We don’t care to mention whichforums or sites as we have no intent to bad mouth or bash anyone. Safe to saytho, if Mr. Cook wishes to go around having his little hissy fit, he is free todo so. But if he is going to issue threats and demands, it might help if hedecided to tell the full and both sides, of the story.



We have been requested to cease work on some jobs by some of our formerclients. These will be sent out, by COD Canada post, as requested, on Monday 19April, 2010. If we’re going to voluntarily give up work at no charge to theowners, I’m quite certain we would refund $20.00 if a proper Twisters Gun Shopreceipt was or could be produced. Suffice it to say, we do not make a policy ofknuckling under to these…ahem…so called men, making schoolboy threats.



Our work has and will stand by itself. If you afraid of having aLesbian work on your firearm, I can personally assure you…your ###ualorientation will not change, for having me touched your gun! I do work on thejobs Twister needs me to work on. He handles all the designs for engraving,scrimshaw, and the actual work itself. I am no Engraver. If tho you feel theselittle emails being sent around, show some sort of relevance to the quality ofour work? Yes you are free to move your work or take it to another of the otherfine Gunsmiths in Calgaryand area. We are not here to challenge anyone’s work or ethics and shall notname these shops out of professional courtesy. No grudge or malice will comefrom the Twisters Team…you are of course, free to take your firearm, whereveryou wish to have it repaired.



If you choose to remain or become a client of Twisters Gun Shop, wethank you, we appreciate your business, and we shall strive to hit a home runfor you and provide our usual excellent service. Yes we are experiencing afinancial crunch at this time. We are experiencing delays because we simplycannot afford to order and pay for all the parts we and outside services werequire. We will keep the delays to a minimum as we can, and thank you for yourpatience, understanding and apologize for the inconvenience our situationcauses you.



We are in the midst of a new “policy agreement” we will use from thistime forward inregards to posting fotos. We won’t be posting any of our workuntil it is done enough, that you can drop by the shop and hold the piece shownon our site, in your hot little hands! That should suffice this nasty businessof Twister be some sort of fake. If it does not…we’re open to suggestions as towhat we can do to satisfy your curiosity. My personal Colt is exempt from thisoffer as I hold a concealed carry permit and the Colt is the sidearm I carry.During the time gunsmithing and engraving were but a hobby to Twister [the past20 odd years], he did not think to take a foto of everything he created. Thisis why we used the fotos we did, he had none. That shall change with theupcoming completion of Queen Gwendolyn, Macksie’s Lee Enfield, etc., includingany customer pieces we gain permission from the owner to use. If we don’t getengraving work until these pieces are ready…so be it.



We apologize for the antics of these people [LOL and whomever} whomhave spammed your inbox with their garbage. We have yet to find a way tocontrol the garbage floating around the internet. If you have…call BillGates…he would love to know how to as well I’m sure. Twister did break hisknuckles and no…we are not about to produce his medical files for anyone. Healso is afflicted with Parkinsons Disease and spent the past 2 years beforeopening the shop, recovering from the third time his neck and back were broken.Same response, we will not produce his medical files as they do not have anyrelevance to the quality of his or my work on your firearms. If it ever does,he doesn’t work…that’s why he has me to assist him. I have green eyes if thateffects my gunsmithing somehow…my god!



In conclusion…Twisters Gun Shop, the Twisters Team and Twister himself,considers these issues asked and answered as far as we are prepared to dealwith them. You have our apology for the fotos, nothing but a compliment to theEngraver was meant. We removed them as requested…we removed ALL of our fotos,including that of the entire Twisters Team due to the physical threats wereceived. These twits have their opinions and they are entitled to them. If wecould get our heads that far up our asses…perhaps we could see their point. Butthat’s not going to happen. The forum on the Twisters site is shut down and ALLMembers locked out, until, and if, we decide to once again even include a forumand blog pages. Twister never did like the idea, so doubtful you’ll ever seethem again. He doesn’t read forums due to what he calls the “foolish content”.Our experimentation with a forum is over…by our choice.



This matter as far as we are concerned is over and done with. Nofurther comment will be issued or discussed by Twisters Gun Shop.



Thank You



Safe & Happy Shooting



Tatyana Hiltz, Shop Manager










http://www.twistguns.com/
Click to expand...

Funny that i already posted them saying that they know i paid them, twister doesn't pick up the phone so its abit hard to get ahold of him over the phone. but let them say what they want, his clients got the message and others in the area did aswell.
 
What's with this statement in bold from the quote above? Does she have a Canadian Concealed Carry permit?

We are in the midst of a new “policy agreement” we will use from thistime forward inregards to posting fotos. We won’t be posting any of our workuntil it is done enough, that you can drop by the shop and hold the piece shownon our site, in your hot little hands! That should suffice this nasty businessof Twister be some sort of fake. If it does not…we’re open to suggestions as towhat we can do to satisfy your curiosity. My personal Colt is exempt from thisoffer as I hold a concealed carry permit and the Colt is the sidearm I carry.During the time gunsmithing and engraving were but a hobby to Twister [the past20 odd years], he did not think to take a foto of everything he created. Thisis why we used the fotos we did, he had none. That shall change with theupcoming completion of Queen Gwendolyn, Macksie’s Lee Enfield, etc., includingany customer pieces we gain permission from the owner to use. If we don’t getengraving work until these pieces are ready…so be it.
Click to expand...
 
If you afraid of having aLesbian work on your firearm, I can personally assure you…your ###ualorientation will not change, for having me touched your gun!
Click to expand...

Gawd, I'd LOVE to have a hot lesbian work on my gun ...... as long as I could watch. So sweetie, you can touch my gun anytime. :)

yes we did “use” fotos for advertisements on the siteand Twisters Facebook page. Yes, Twister approved them as in his words “theymake damn good advertisements”.
Click to expand...

Yeah, I bet using other people's work is an excellent advertisement for your shop. That they don't seem to understand how potential customer's might be upset by such a deception is an interesting point of view.

My personal Colt is exempt from thisoffer as I hold a concealed carry permit and the Colt is the sidearm I carry.
Click to expand...

I wonder what the CFC would think of this statement?
 
Why is all this free advertising being permitted for an operation such as this?

This thread should be removed and further discussion on this subject not be permitted.​

LET IT DIE...


Just my thoughts...​
 
"My personal Colt is exempt from this offer as I hold a concealed carry permit and the Colt is the sidearm I carry."

HUH????????????:confused:


This would make her likely thee only person not in some form of LE to have a CCW permit in Canada, my God I wish I was THAT special.

Someone please pass the backhoe. The longer this thread gets the deeper the fertilizer seems to get :runaway:
 
guntech said:
Why is all this free advertising being permitted for an operation such as this?

This thread should be removed and further discussion on this subject not be permitted.​

LET IT DIE...


Just my thoughts...​
Click to expand...

Dennis,this is not the kind of advertising any business would want, it will be sending more business your way.
 
guntech said:
Why is all this free advertising being permitted for an operation such as this?

This thread should be removed and further discussion on this subject not be permitted.​

LET IT DIE...


Just my thoughts...​
Click to expand...

This is just making the real gun techs look good. And besides how would it look if most here believe in free speech and gun ownership and we start censoring?
 
Status
Not open for further replies.
Back
Top Bottom