Husqvarna Sporting Rifles #### - ALL MODELS!!!

Yes, basically it is just that...However as a true lightweight (for instance, compared to the bulky logs that the Sako carbines became after the 60's) I think it might be a real loud kicker in 9.3 X 62. To me, 30-06 is near the upper limit for such a light short barreled carbine.

yes, you are probably right. I have a 9.3x62 on a Husky 46, it is a pretty good kicker, even with the longer barrel.
 
New to me - but older than my dad.

Got this 3000 Crown Grade in recently - stripped it down and put three coats of boiled linseed oil on the stock (which was looking a bit dull and dried out) and took detailed pics of all the markings as I was putting it back together. If anyone has any comment on the rifle I would love to hear it as this one seems to have some old parts (smooth trigger, no stock cross pin) and newer parts. Serial number puts this one at 1957 (thanks Baribal) and it was obviously someone's prized possession as it is in very good shape for a 61 year old rifle. Almost makes me want to start keeping a journal for every rifle I have (hunting trips they went on, exaggerated shots made, etc.). If rifles could talk the world would never run out of stories.

View attachment 287631View attachment 287632View attachment 287633View attachment 287636View attachment 287634View attachment 287635
 
I was at an Alberta gun show last weekend. I saw quite a few Husqvarna rifles.

What amazed me was that prices of average Husqvarnas don't seem to have increased all that much since the mid-1980's! (In that same span of time you could have made a small fortune on the increase in value of military rifles like a basic Mosin-Nagant: approx. $400. now, compared to $25. in 1985) I assume this plateauing of HVA prices is because of the flood of cheap used Swedish sporters coming in through Tradeex, etc.

It may also be true of the value of other sporting rifles, as the interest in hunting continues to decline. But it seems very noticeable with Husqvarna.

Its a great time to buy.
 
Last edited:
Hey all,

I've got a Husqvarna rifle I'm looking to determine vintage and model on:) The serial #635985 and has a camo stock. Let me know if you can help!!
 
Hi bjh396ss,

From my standing point, your rifle seems to be more of an ex-miliary rifle than a commercial Husqvarna rifle. Also, HVA never fitted a camo stock on any of their rifles.
If it's a ####-on-closing action, M/38 action, then, it was made in 1942 but you will want to go to the military rifles forum to know more about it.
 
Aside from the obvious steel to alloy triggerguard, can you describe some of the other parts that have changed over time?

The bolt release tab came in a couple different versions...

On a side note, are there any modern rear sights for the 2 side holes that don't require stock mods? Have a spare '06 I need to do something with, and thinking of keeping it irons.
 
The release levers came in three different shapes and two locations.
The bolt shrouds show two variations, the bolts themselves have at least two different configurations. The triggers came with and without grooves and some models came wit the Timney adjustable trigger. The front ramps show three different configuration / shapes, the hoods are slightly different over time. The rear sights came in several types / styles depending on time / models...
 
The release levers came in three different shapes and two locations.
The bolt shrouds show two variations, the bolts themselves have at least two different configurations. The triggers came with and without grooves and some models came wit the Timney adjustable trigger. The front ramps show three different configuration / shapes, the hoods are slightly different over time. The rear sights came in several types / styles depending on time / models...

It would be nice to see photos of all these various changes/versions. I recently noted two different versions of the sliding safety on the trigger; one with the permanently fixed pin that engages the spring on one side and one with it on the other side...which means there must be two different versions of the spring as well.
 
Yes, there are at least two (maybe even three) different safety levers, too.

Unfortunateley, I won't have time to take such pictures for a while.
 
Picked up a new Husqvarna in 270, serial number is 2998xx. Baribal, I havent had one in this model before, i believe it may be a 3000 crown grade but I'm hoping you could identify it for me. Bolt is jewelled, has the "plasticky" type stock finish, other than that it's just like any other 1600/1640 I've had.
 
Last edited:
Since the stock finish is urethane, it most likely also have 1" sling swivels, so yes, it's a 3000, second (and last) stock variation, made in last months of 1965.
 
Any further help on Identification

Hi there I just recently picked up this husqvarna .270. Not one hundred percent what the rifle is, from what I have found it’s a 1900 action, as far as the series?? 8000? Bought off a friend very reasonably, after my main hunting rifle developed some issues in our hunting. Thanks! This has been a neat sticky!
https://photos.app.goo.gl/UMGyVHWb63XVSgYx8
 
Happy New Year sthorvictor

Before being able to answer your question as of what "model" it is, I need to know what the left side of the action says. Then, I need to know the serial number range and the sling swivel size (1" or 3/4"?)...
 
This lovely lady will be on her way to me from Trade Ex shortly. Husqvarna 1600 in 8x57, my second 1600, I have one in 6.5x55 already.

45778.jpg
 
Last edited:
Back
Top Bottom