Knoxx SpecOps Stock
- Thread starter proxpar
- Start date
I just bought one at The Shooting Edge a couple of days ago for my 14" 870P, and they still had 5 or 6 of them in stock.
And I will say, this stock rocks! I shot 2 boxes of Winchester rifles slugs with the old stock and then changed the stock and shot another 3 boxes of the same slugs with the Knoxx. And the felt recoil was easily cut in half! It is actually enjoyable to shoot slugs out of my 870P now! It's also nice to be able to adjust the LOP of the stock.
And I will say, this stock rocks! I shot 2 boxes of Winchester rifles slugs with the old stock and then changed the stock and shot another 3 boxes of the same slugs with the Knoxx. And the felt recoil was easily cut in half! It is actually enjoyable to shoot slugs out of my 870P now! It's also nice to be able to adjust the LOP of the stock.
- Location
- East ontario
Not the not being able to get to the safety easy is because the stock adaptor comes to close to the trigger guard, what would work best is a spacer in front of the stock adaptor where it meets the back of the gun frame.
Now what i would do is put a single point sling attachment in front of the stock this will give you enough room to get to the safety and you can still change the LOP to make it shorter as the m4 stocks they use have 6positions
check the link out in my sig line if your looking for an adaptor.
new batch were picked up today.
hope that helps
bbb
Now what i would do is put a single point sling attachment in front of the stock this will give you enough room to get to the safety and you can still change the LOP to make it shorter as the m4 stocks they use have 6positions
check the link out in my sig line if your looking for an adaptor.
new batch were picked up today.
hope that helps
bbb
Last edited:
JohnC
CGN Ultra frequent flyer
Nine said:WOOT!
I was wondering about that.
and...
OK you've convinced me to try to lose my photo posting virginity. here it is:
and no that wasn't so bad
.the tape around the surefire is to keep the muzzle blast from staining the light body and reduce reflections. It has a 1 shot extension and normally wears an Eotech on top of the Picatinny rail.
JohnC
CGN Ultra frequent flyer
it's a straight Picatinny rail I got from Brobee about a year ot two ago along with his 870 adapter back when he was selling them. one of these day's i'll have the bottom machined to match the contour of the receiver. it works well I can line up the bead between the rail sides.
brownells now lists a milspec picatinny rail contoured for the 870 for around $90. Guess I was a bit ahead of my time.
brownells now lists a milspec picatinny rail contoured for the 870 for around $90. Guess I was a bit ahead of my time.
